AFG/dump1090
3
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
dump1090/dump1090.c
Oliver Jowett 008ae926e7 Add --net-verbatim, which forwards the original uncorrected message to net clients, 
not the corrected version. Then the client can make its own policy decisions about
whether to accept and correct the damaged messages.
2015-01-22 19:56:38 +00:00

1074 lines
43 KiB
C
Raw Blame History

// Part of dump1090, a Mode S message decoder for RTLSDR devices.
//
// dump1090.c: main program & miscellany
//
// Copyright (c) 2014,2015 Oliver Jowett <oliver@mutability.co.uk>
//
// This file is free software: you may copy, redistribute and/or modify it
// under the terms of the GNU General Public License as published by the
// Free Software Foundation, either version 2 of the License, or (at your
// option) any later version.
//
// This file is distributed in the hope that it will be useful, but
// WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
// This file incorporates work covered by the following copyright and
// permission notice:
//
// Copyright (C) 2012 by Salvatore Sanfilippo <antirez@gmail.com>
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// * Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include "dump1090.h"
static int verbose_device_search(char *s);
//
// ============================= Utility functions ==========================
//
void sigintHandler(int dummy) {
MODES_NOTUSED(dummy);
signal(SIGINT, SIG_DFL); // reset signal handler - bit extra safety
Modes.exit = 1; // Signal to threads that we are done
}
//
// =============================== Terminal handling ========================
//
#ifndef _WIN32
// Get the number of rows after the terminal changes size.
int getTermRows() {
struct winsize w;
ioctl(STDOUT_FILENO, TIOCGWINSZ, &w);
return (w.ws_row);
}
// Handle resizing terminal
void sigWinchCallback() {
signal(SIGWINCH, SIG_IGN);
Modes.interactive_rows = getTermRows();
interactiveShowData();
signal(SIGWINCH, sigWinchCallback);
}
#else
int getTermRows() { return MODES_INTERACTIVE_ROWS;}
#endif
//
// =============================== Initialization ===========================
//
void modesInitConfig(void) {
// Default everything to zero/NULL
memset(&Modes, 0, sizeof(Modes));
// Now initialise things that should not be 0/NULL to their defaults
Modes.gain = MODES_MAX_GAIN;
Modes.freq = MODES_DEFAULT_FREQ;
Modes.ppm_error = MODES_DEFAULT_PPM;
Modes.check_crc = 1;
Modes.net_heartbeat_interval = MODES_NET_HEARTBEAT_INTERVAL;
Modes.net_output_sbs_port = MODES_NET_OUTPUT_SBS_PORT;
Modes.net_output_raw_port = MODES_NET_OUTPUT_RAW_PORT;
Modes.net_input_raw_port = MODES_NET_INPUT_RAW_PORT;
Modes.net_output_beast_port = MODES_NET_OUTPUT_BEAST_PORT;
Modes.net_input_beast_port = MODES_NET_INPUT_BEAST_PORT;
Modes.net_http_port = MODES_NET_HTTP_PORT;
Modes.net_fatsv_port = MODES_NET_OUTPUT_FA_TSV_PORT;
Modes.interactive_rows = getTermRows();
Modes.interactive_delete_ttl = MODES_INTERACTIVE_DELETE_TTL;
Modes.interactive_display_ttl = MODES_INTERACTIVE_DISPLAY_TTL;
Modes.json_interval = 1;
Modes.json_location_accuracy = 1;
Modes.maxRange = 1852 * 300; // 300NM default max range
}
//
//=========================================================================
//
void modesInit(void) {
int i, q;
pthread_mutex_init(&Modes.data_mutex,NULL);
pthread_cond_init(&Modes.data_cond,NULL);
// Allocate the various buffers used by Modes
Modes.trailing_samples = (Modes.oversample ? (MODES_OS_PREAMBLE_SAMPLES + MODES_OS_LONG_MSG_SAMPLES) : (MODES_PREAMBLE_SAMPLES + MODES_LONG_MSG_SAMPLES)) + 16;
if ( ((Modes.pFileData = (uint16_t *) malloc(MODES_ASYNC_BUF_SIZE) ) == NULL) ||
((Modes.magnitude = (uint16_t *) calloc(MODES_ASYNC_BUF_SAMPLES+Modes.trailing_samples, 2) ) == NULL) ||
((Modes.maglut = (uint16_t *) malloc(sizeof(uint16_t) * 256 * 256) ) == NULL) ||
((Modes.log10lut = (uint16_t *) malloc(sizeof(uint16_t) * 256 * 256) ) == NULL) )
{
fprintf(stderr, "Out of memory allocating data buffer.\n");
exit(1);
}
// Clear the buffers that have just been allocated, just in-case
memset(Modes.pFileData,127, MODES_ASYNC_BUF_SIZE);
// Validate the users Lat/Lon home location inputs
if ( (Modes.fUserLat > 90.0) // Latitude must be -90 to +90
|| (Modes.fUserLat < -90.0) // and
|| (Modes.fUserLon > 360.0) // Longitude must be -180 to +360
|| (Modes.fUserLon < -180.0) ) {
Modes.fUserLat = Modes.fUserLon = 0.0;
} else if (Modes.fUserLon > 180.0) { // If Longitude is +180 to +360, make it -180 to 0
Modes.fUserLon -= 360.0;
}
// If both Lat and Lon are 0.0 then the users location is either invalid/not-set, or (s)he's in the
// Atlantic ocean off the west coast of Africa. This is unlikely to be correct.
// Set the user LatLon valid flag only if either Lat or Lon are non zero. Note the Greenwich meridian
// is at 0.0 Lon,so we must check for either fLat or fLon being non zero not both.
// Testing the flag at runtime will be much quicker than ((fLon != 0.0) || (fLat != 0.0))
Modes.bUserFlags &= ~MODES_USER_LATLON_VALID;
if ((Modes.fUserLat != 0.0) || (Modes.fUserLon != 0.0)) {
Modes.bUserFlags |= MODES_USER_LATLON_VALID;
}
// Limit the maximum requested raw output size to less than one Ethernet Block
if (Modes.net_output_flush_size > (MODES_OUT_FLUSH_SIZE))
{Modes.net_output_flush_size = MODES_OUT_FLUSH_SIZE;}
if (Modes.net_output_flush_interval > (MODES_OUT_FLUSH_INTERVAL))
{Modes.net_output_flush_interval = MODES_OUT_FLUSH_INTERVAL;}
if (Modes.net_sndbuf_size > (MODES_NET_SNDBUF_MAX))
{Modes.net_sndbuf_size = MODES_NET_SNDBUF_MAX;}
// Initialise the Block Timers to something half sensible
ftime(&Modes.stSystemTimeBlk);
for (i = 0; i < MODES_ASYNC_BUF_NUMBER; i++)
{Modes.stSystemTimeRTL[i] = Modes.stSystemTimeBlk;}
// Each I and Q value varies from 0 to 255, which represents a range from -1 to +1. To get from the
// unsigned (0-255) range you therefore subtract 127 (or 128 or 127.5) from each I and Q, giving you
// a range from -127 to +128 (or -128 to +127, or -127.5 to +127.5)..
//
// To decode the AM signal, you need the magnitude of the waveform, which is given by sqrt((I^2)+(Q^2))
// The most this could be is if I&Q are both 128 (or 127 or 127.5), so you could end up with a magnitude
// of 181.019 (or 179.605, or 180.312)
//
// However, in reality the magnitude of the signal should never exceed the range -1 to +1, because the
// values are I = rCos(w) and Q = rSin(w). Therefore the integer computed magnitude should (can?) never
// exceed 128 (or 127, or 127.5 or whatever)
//
// If we scale up the results so that they range from 0 to 65535 (16 bits) then we need to multiply
// by 511.99, (or 516.02 or 514). antirez's original code multiplies by 360, presumably because he's
// assuming the maximim calculated amplitude is 181.019, and (181.019 * 360) = 65166.
//
// So lets see if we can improve things by subtracting 127.5, Well in integer arithmatic we can't
// subtract half, so, we'll double everything up and subtract one, and then compensate for the doubling
// in the multiplier at the end.
//
// If we do this we can never have I or Q equal to 0 - they can only be as small as +/- 1.
// This gives us a minimum magnitude of root 2 (0.707), so the dynamic range becomes (1.414-255). This
// also affects our scaling value, which is now 65535/(255 - 1.414), or 258.433254
//
// The sums then become mag = 258.433254 * (sqrt((I*2-255)^2 + (Q*2-255)^2) - 1.414)
// or mag = (258.433254 * sqrt((I*2-255)^2 + (Q*2-255)^2)) - 365.4798
//
// We also need to clip mag just incaes any rogue I/Q values somehow do have a magnitude greater than 255.
//
for (i = 0; i <= 255; i++) {
for (q = 0; q <= 255; q++) {
int mag, mag_i, mag_q;
mag_i = (i * 2) - 255;
mag_q = (q * 2) - 255;
mag = (int) round((sqrt((mag_i*mag_i)+(mag_q*mag_q)) * 258.433254) - 365.4798);
Modes.maglut[(i*256)+q] = (uint16_t) ((mag < 65535) ? mag : 65535);
}
}
// Prepare the log10 lookup table.
// This maps from a magnitude value x (scaled as above) to 100log10(x)
for (i = 0; i <= 65535; i++) {
int l10 = (int) round(100 * log10( (i + 365.4798) / 258.433254) );
Modes.log10lut[i] = (uint16_t) ((l10 < 65535 ? l10 : 65535));
}
// Prepare error correction tables
modesChecksumInit(Modes.nfix_crc);
icaoFilterInit();
}
//
// =============================== RTLSDR handling ==========================
//
int modesInitRTLSDR(void) {
int j;
int device_count, dev_index = 0;
char vendor[256], product[256], serial[256];
if (Modes.dev_name) {
if ( (dev_index = verbose_device_search(Modes.dev_name)) < 0 )
return -1;
}
device_count = rtlsdr_get_device_count();
if (!device_count) {
fprintf(stderr, "No supported RTLSDR devices found.\n");
return -1;
}
fprintf(stderr, "Found %d device(s):\n", device_count);
for (j = 0; j < device_count; j++) {
rtlsdr_get_device_usb_strings(j, vendor, product, serial);
fprintf(stderr, "%d: %s, %s, SN: %s %s\n", j, vendor, product, serial,
(j == dev_index) ? "(currently selected)" : "");
}
if (rtlsdr_open(&Modes.dev, dev_index) < 0) {
fprintf(stderr, "Error opening the RTLSDR device: %s\n",
strerror(errno));
return -1;
}
// Set gain, frequency, sample rate, and reset the device
rtlsdr_set_tuner_gain_mode(Modes.dev,
(Modes.gain == MODES_AUTO_GAIN) ? 0 : 1);
if (Modes.gain != MODES_AUTO_GAIN) {
int *gains;
int numgains;
numgains = rtlsdr_get_tuner_gains(Modes.dev, NULL);
if (numgains <= 0) {
fprintf(stderr, "Error getting tuner gains\n");
return -1;
}
gains = malloc(numgains * sizeof(int));
if (rtlsdr_get_tuner_gains(Modes.dev, gains) != numgains) {
fprintf(stderr, "Error getting tuner gains\n");
free(gains);
return -1;
}
if (Modes.gain == MODES_MAX_GAIN) {
int highest = -1;
int i;
for (i = 0; i < numgains; ++i) {
if (gains[i] > highest)
highest = gains[i];
}
Modes.gain = highest;
fprintf(stderr, "Max available gain is: %.2f dB\n", Modes.gain/10.0);
} else {
int closest = -1;
int i;
for (i = 0; i < numgains; ++i) {
if (closest == -1 || abs(gains[i] - Modes.gain) < abs(closest - Modes.gain))
closest = gains[i];
}
if (closest != Modes.gain) {
Modes.gain = closest;
fprintf(stderr, "Closest available gain: %.2f dB\n", Modes.gain/10.0);
}
}
free(gains);
fprintf(stderr, "Setting gain to: %.2f dB\n", Modes.gain/10.0);
if (rtlsdr_set_tuner_gain(Modes.dev, Modes.gain) < 0) {
fprintf(stderr, "Error setting tuner gains\n");
return -1;
}
} else {
fprintf(stderr, "Using automatic gain control.\n");
}
rtlsdr_set_freq_correction(Modes.dev, Modes.ppm_error);
if (Modes.enable_agc) rtlsdr_set_agc_mode(Modes.dev, 1);
rtlsdr_set_center_freq(Modes.dev, Modes.freq);
rtlsdr_set_sample_rate(Modes.dev, Modes.oversample ? MODES_OVERSAMPLE_RATE : MODES_DEFAULT_RATE);
rtlsdr_reset_buffer(Modes.dev);
fprintf(stderr, "Gain reported by device: %.2f dB\n",
rtlsdr_get_tuner_gain(Modes.dev)/10.0);
return 0;
}
//
//=========================================================================
//
// We use a thread reading data in background, while the main thread
// handles decoding and visualization of data to the user.
//
// The reading thread calls the RTLSDR API to read data asynchronously, and
// uses a callback to populate the data buffer.
//
// A Mutex is used to avoid races with the decoding thread.
//
void rtlsdrCallback(unsigned char *buf, uint32_t len, void *ctx) {
MODES_NOTUSED(ctx);
// Lock the data buffer variables before accessing them
pthread_mutex_lock(&Modes.data_mutex);
Modes.iDataIn &= (MODES_ASYNC_BUF_NUMBER-1); // Just incase!!!
// Get the system time for this block
ftime(&Modes.stSystemTimeRTL[Modes.iDataIn]);
if (len > MODES_ASYNC_BUF_SIZE) {len = MODES_ASYNC_BUF_SIZE;}
// Queue the new data
Modes.pData[Modes.iDataIn] = (uint16_t *) buf;
Modes.iDataIn = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataIn + 1);
Modes.iDataReady = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataIn - Modes.iDataOut);
if (Modes.iDataReady == 0) {
// Ooooops. We've just received the MODES_ASYNC_BUF_NUMBER'th outstanding buffer
// This means that RTLSDR is currently overwriting the MODES_ASYNC_BUF_NUMBER+1
// buffer, but we havent yet processed it, so we're going to lose it. There
// isn't much we can do to recover the lost data, but we can correct things to
// avoid any additional problems.
Modes.iDataOut = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataOut+1);
Modes.iDataReady = (MODES_ASYNC_BUF_NUMBER-1);
Modes.iDataLost++;
}
// Signal to the other thread that new data is ready, and unlock
pthread_cond_signal(&Modes.data_cond);
pthread_mutex_unlock(&Modes.data_mutex);
}
//
//=========================================================================
//
// This is used when --ifile is specified in order to read data from file
// instead of using an RTLSDR device
//
void readDataFromFile(void) {
pthread_mutex_lock(&Modes.data_mutex);
while(Modes.exit == 0) {
ssize_t nread, toread;
unsigned char *p;
if (Modes.iDataReady) {
pthread_cond_wait(&Modes.data_cond, &Modes.data_mutex);
continue;
}
if (Modes.interactive) {
// When --ifile and --interactive are used together, slow down
// playing at the natural rate of the RTLSDR received.
pthread_mutex_unlock(&Modes.data_mutex);
usleep(64000);
pthread_mutex_lock(&Modes.data_mutex);
}
toread = MODES_ASYNC_BUF_SIZE;
p = (unsigned char *) Modes.pFileData;
while(toread) {
nread = read(Modes.fd, p, toread);
if (nread <= 0) {
// Done.
Modes.exit = 1; // Signal the other threads to exit.
goto OUT;
}
p += nread;
toread -= nread;
}
if (toread) {
// Not enough data on file to fill the buffer? Pad with no signal.
memset(p,127,toread);
}
Modes.iDataIn &= (MODES_ASYNC_BUF_NUMBER-1); // Just incase!!!
// Get the system time for this block
ftime(&Modes.stSystemTimeRTL[Modes.iDataIn]);
// Queue the new data
Modes.pData[Modes.iDataIn] = Modes.pFileData;
Modes.iDataIn = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataIn + 1);
Modes.iDataReady = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataIn - Modes.iDataOut);
// Signal to the other thread that new data is ready
pthread_cond_signal(&Modes.data_cond);
}
OUT:
pthread_mutex_unlock(&Modes.data_mutex);
}
//
//=========================================================================
//
// We read data using a thread, so the main thread only handles decoding
// without caring about data acquisition
//
void *readerThreadEntryPoint(void *arg) {
MODES_NOTUSED(arg);
if (Modes.filename == NULL) {
while (!Modes.exit) {
rtlsdr_read_async(Modes.dev, rtlsdrCallback, NULL,
MODES_ASYNC_BUF_NUMBER,
MODES_ASYNC_BUF_SIZE);
if (!Modes.exit) {
fprintf(stderr, "Warning: lost the connection to the RTLSDR device.\n");
rtlsdr_close(Modes.dev);
do {
sleep(5);
fprintf(stderr, "Trying to reconnect to the RTLSDR device..\n");
} while (!Modes.exit && modesInitRTLSDR() < 0);
}
}
} else {
readDataFromFile();
}
// Wake the main thread (if it's still waiting)
pthread_mutex_lock(&Modes.data_mutex);
Modes.exit = 1; // just in case
pthread_cond_signal(&Modes.data_cond);
pthread_mutex_unlock(&Modes.data_mutex);
#ifndef _WIN32
pthread_exit(NULL);
#else
return NULL;
#endif
}
//
// ============================== Snip mode =================================
//
// Get raw IQ samples and filter everything is < than the specified level
// for more than 256 samples in order to reduce example file size
//
void snipMode(int level) {
int i, q;
uint64_t c = 0;
while ((i = getchar()) != EOF && (q = getchar()) != EOF) {
if (abs(i-127) < level && abs(q-127) < level) {
c++;
if (c > MODES_PREAMBLE_SIZE) continue;
} else {
c = 0;
}
putchar(i);
putchar(q);
}
}
//
// ================================ Main ====================================
//
void showHelp(void) {
printf(
"-----------------------------------------------------------------------------\n"
"| dump1090 ModeS Receiver %45s |\n"
"-----------------------------------------------------------------------------\n"
"--device-index <index> Select RTL device (default: 0)\n"
"--gain <db> Set gain (default: max gain. Use -10 for auto-gain)\n"
"--enable-agc Enable the Automatic Gain Control (default: off)\n"
"--freq <hz> Set frequency (default: 1090 Mhz)\n"
"--ifile <filename> Read data from file (use '-' for stdin)\n"
"--interactive Interactive mode refreshing data on screen\n"
"--interactive-rows <num> Max number of rows in interactive mode (default: 15)\n"
"--interactive-ttl <sec> Remove from list if idle for <sec> (default: 60)\n"
"--interactive-rtl1090 Display flight table in RTL1090 format\n"
"--raw Show only messages hex values\n"
"--net Enable networking\n"
"--modeac Enable decoding of SSR Modes 3/A & 3/C\n"
"--net-only Enable just networking, no RTL device or file used\n"
"--net-bind-address <ip> IP address to bind to (default: Any; Use 127.0.0.1 for private)\n"
"--net-http-port <port> HTTP server port (default: 8080)\n"
"--net-ri-port <port> TCP raw input listen port (default: 30001)\n"
"--net-ro-port <port> TCP raw output listen port (default: 30002)\n"
"--net-sbs-port <port> TCP BaseStation output listen port (default: 30003)\n"
"--net-bi-port <port> TCP Beast input listen port (default: 30004)\n"
"--net-bo-port <port> TCP Beast output listen port (default: 30005)\n"
"--net-fatsv-port <port> FlightAware TSV output port (default: 10001)\n"
"--net-ro-size <size> TCP output minimum size (default: 0)\n"
"--net-ro-interval <rate> TCP output memory flush rate in seconds (default: 0)\n"
"--net-heartbeat <rate> TCP heartbeat rate in seconds (default: 60 sec; 0 to disable)\n"
"--net-buffer <n> TCP buffer size 64Kb * (2^n) (default: n=0, 64Kb)\n"
"--net-verbatim Do not apply CRC corrections to messages we forward; send unchanged\n"
"--lat <latitude> Reference/receiver latitude for surface posn (opt)\n"
"--lon <longitude> Reference/receiver longitude for surface posn (opt)\n"
"--max-range <distance> Absolute maximum range for position decoding (in nm, default: 300)\n"
"--fix Enable single-bits error correction using CRC\n"
"--no-fix Disable single-bits error correction using CRC\n"
"--no-crc-check Disable messages with broken CRC (discouraged)\n"
"--phase-enhance Enable phase enhancement\n"
"--aggressive More CPU for more messages (two bits fixes, ...)\n"
"--mlat display raw messages in Beast ascii mode\n"
"--stats With --ifile print stats at exit. No other output\n"
"--stats-every <seconds> Show and reset stats every <seconds> seconds\n"
"--onlyaddr Show only ICAO addresses (testing purposes)\n"
"--metric Use metric units (meters, km/h, ...)\n"
"--snip <level> Strip IQ file removing samples < level\n"
"--debug <flags> Debug mode (verbose), see README for details\n"
"--quiet Disable output to stdout. Use for daemon applications\n"
"--ppm <error> Set receiver error in parts per million (default 0)\n"
"--no-decode Don't decode the message contents beyond the minimum necessary\n"
"--write-json <dir> Periodically write json output to <dir> (for serving by a separate webserver)\n"
"--write-json-every <t> Write json output every t seconds (default 1)\n"
"--json-location-accuracy <n> Accuracy of receiver location in json metadata: 0=no location, 1=approximate, 2=exact\n"
"--help Show this help\n"
"\n"
"Debug mode flags: d = Log frames decoded with errors\n"
" D = Log frames decoded with zero errors\n"
" c = Log frames with bad CRC\n"
" C = Log frames with good CRC\n"
" p = Log frames with bad preamble\n"
" n = Log network debugging info\n"
" j = Log frames to frames.js, loadable by debug.html\n",
MODES_DUMP1090_VARIANT " " MODES_DUMP1090_VERSION
);
}
#ifdef _WIN32
void showCopyright(void) {
uint64_t llTime = time(NULL) + 1;
printf(
"-----------------------------------------------------------------------------\n"
"| dump1090 ModeS Receiver Ver : " MODES_DUMP1090_VERSION " |\n"
"-----------------------------------------------------------------------------\n"
"\n"
" Copyright (C) 2012 by Salvatore Sanfilippo <antirez@gmail.com>\n"
" Copyright (C) 2014 by Malcolm Robb <support@attavionics.com>\n"
"\n"
" All rights reserved.\n"
"\n"
" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS\n"
" ""AS IS"" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT\n"
" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR\n"
" A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT\n"
" HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,\n"
" SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT\n"
" LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,\n"
" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY\n"
" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT\n"
" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE\n"
" OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n"
"\n"
" For further details refer to <https://github.com/MalcolmRobb/dump1090>\n"
"\n"
);
// delay for 1 second to give the user a chance to read the copyright
while (llTime >= time(NULL)) {}
}
#endif
static void display_total_stats(void)
{
struct stats added;
add_stats(&Modes.stats_alltime, &Modes.stats_current, &added);
display_stats(&added);
}
//
//=========================================================================
//
// This function is called a few times every second by main in order to
// perform tasks we need to do continuously, like accepting new clients
// from the net, refreshing the screen in interactive mode, and so forth
//
void backgroundTasks(void) {
static time_t next_stats_display;
static time_t next_stats_update;
static time_t next_json, next_history;
time_t now = time(NULL);
icaoFilterExpire();
if (Modes.net) {
modesNetPeriodicWork();
}
// If Modes.aircrafts is not NULL, remove any stale aircraft
if (Modes.aircrafts) {
interactiveRemoveStaleAircrafts();
}
// Refresh screen when in interactive mode
if (Modes.interactive) {
interactiveShowData();
}
// always update end time so it is current when requests arrive
Modes.stats_current.end = now;
if (now >= next_stats_update) {
int i;
if (next_stats_update == 0) {
next_stats_update = now + 60;
} else {
Modes.stats_latest_1min = (Modes.stats_latest_1min + 1) % 15;
Modes.stats_1min[Modes.stats_latest_1min] = Modes.stats_current;
add_stats(&Modes.stats_current, &Modes.stats_alltime, &Modes.stats_alltime);
add_stats(&Modes.stats_current, &Modes.stats_periodic, &Modes.stats_periodic);
reset_stats(&Modes.stats_5min);
for (i = 0; i < 5; ++i)
add_stats(&Modes.stats_1min[(Modes.stats_latest_1min - i + 15) % 15], &Modes.stats_5min, &Modes.stats_5min);
reset_stats(&Modes.stats_15min);
for (i = 0; i < 15; ++i)
add_stats(&Modes.stats_1min[i], &Modes.stats_15min, &Modes.stats_15min);
reset_stats(&Modes.stats_current);
Modes.stats_current.start = Modes.stats_current.end = now;
if (Modes.json_dir)
writeJsonToFile("stats.json", generateStatsJson);
next_stats_update += 60;
}
}
if (Modes.stats > 0 && now >= next_stats_display) {
if (next_stats_display == 0) {
next_stats_display = now + Modes.stats;
} else {
add_stats(&Modes.stats_periodic, &Modes.stats_current, &Modes.stats_periodic);
display_stats(&Modes.stats_periodic);
reset_stats(&Modes.stats_periodic);
next_stats_display += Modes.stats;
}
}
if (Modes.json_dir && now >= next_json) {
writeJsonToFile("aircraft.json", generateAircraftJson);
next_json = now + Modes.json_interval;
}
if ((Modes.json_dir || Modes.net_http_port) && now >= next_history) {
int rewrite_receiver_json = (Modes.json_aircraft_history[HISTORY_SIZE-1].content == NULL);
free(Modes.json_aircraft_history[Modes.json_aircraft_history_next].content); // might be NULL, that's OK.
Modes.json_aircraft_history[Modes.json_aircraft_history_next].content =
generateAircraftJson("/data/aircraft.json", &Modes.json_aircraft_history[Modes.json_aircraft_history_next].clen);
if (Modes.json_dir) {
char filebuf[PATH_MAX];
snprintf(filebuf, PATH_MAX, "history_%d.json", Modes.json_aircraft_history_next);
writeJsonToFile(filebuf, generateHistoryJson);
}
Modes.json_aircraft_history_next = (Modes.json_aircraft_history_next+1) % HISTORY_SIZE;
if (rewrite_receiver_json)
writeJsonToFile("receiver.json", generateReceiverJson); // number of history entries changed
next_history = now + HISTORY_INTERVAL;
}
}
//
//=========================================================================
//
int verbose_device_search(char *s)
{
int i, device_count, device, offset;
char *s2;
char vendor[256], product[256], serial[256];
device_count = rtlsdr_get_device_count();
if (!device_count) {
fprintf(stderr, "No supported devices found.\n");
return -1;
}
fprintf(stderr, "Found %d device(s):\n", device_count);
for (i = 0; i < device_count; i++) {
rtlsdr_get_device_usb_strings(i, vendor, product, serial);
fprintf(stderr, " %d: %s, %s, SN: %s\n", i, vendor, product, serial);
}
fprintf(stderr, "\n");
/* does string look like raw id number */
device = (int)strtol(s, &s2, 0);
if (s2[0] == '\0' && device >= 0 && device < device_count) {
fprintf(stderr, "Using device %d: %s\n",
device, rtlsdr_get_device_name((uint32_t)device));
return device;
}
/* does string exact match a serial */
for (i = 0; i < device_count; i++) {
rtlsdr_get_device_usb_strings(i, vendor, product, serial);
if (strcmp(s, serial) != 0) {
continue;}
device = i;
fprintf(stderr, "Using device %d: %s\n",
device, rtlsdr_get_device_name((uint32_t)device));
return device;
}
/* does string prefix match a serial */
for (i = 0; i < device_count; i++) {
rtlsdr_get_device_usb_strings(i, vendor, product, serial);
if (strncmp(s, serial, strlen(s)) != 0) {
continue;}
device = i;
fprintf(stderr, "Using device %d: %s\n",
device, rtlsdr_get_device_name((uint32_t)device));
return device;
}
/* does string suffix match a serial */
for (i = 0; i < device_count; i++) {
rtlsdr_get_device_usb_strings(i, vendor, product, serial);
offset = strlen(serial) - strlen(s);
if (offset < 0) {
continue;}
if (strncmp(s, serial+offset, strlen(s)) != 0) {
continue;}
device = i;
fprintf(stderr, "Using device %d: %s\n",
device, rtlsdr_get_device_name((uint32_t)device));
return device;
}
fprintf(stderr, "No matching devices found.\n");
return -1;
}
//
//=========================================================================
//
int main(int argc, char **argv) {
int j;
// Set sane defaults
modesInitConfig();
signal(SIGINT, sigintHandler); // Define Ctrl/C handler (exit program)
// Parse the command line options
for (j = 1; j < argc; j++) {
int more = j+1 < argc; // There are more arguments
if (!strcmp(argv[j],"--device-index") && more) {
Modes.dev_name = strdup(argv[++j]);
} else if (!strcmp(argv[j],"--gain") && more) {
Modes.gain = (int) (atof(argv[++j])*10); // Gain is in tens of DBs
} else if (!strcmp(argv[j],"--enable-agc")) {
Modes.enable_agc++;
} else if (!strcmp(argv[j],"--freq") && more) {
Modes.freq = (int) strtoll(argv[++j],NULL,10);
} else if (!strcmp(argv[j],"--ifile") && more) {
Modes.filename = strdup(argv[++j]);
} else if (!strcmp(argv[j],"--fix")) {
Modes.nfix_crc = 1;
} else if (!strcmp(argv[j],"--no-fix")) {
Modes.nfix_crc = 0;
} else if (!strcmp(argv[j],"--no-crc-check")) {
Modes.check_crc = 0;
} else if (!strcmp(argv[j],"--phase-enhance")) {
Modes.phase_enhance = 1;
} else if (!strcmp(argv[j],"--raw")) {
Modes.raw = 1;
} else if (!strcmp(argv[j],"--net")) {
Modes.net = 1;
} else if (!strcmp(argv[j],"--modeac")) {
Modes.mode_ac = 1;
} else if (!strcmp(argv[j],"--net-beast")) {
Modes.beast = 1;
} else if (!strcmp(argv[j],"--net-only")) {
Modes.net = 1;
Modes.net_only = 1;
} else if (!strcmp(argv[j],"--net-heartbeat") && more) {
Modes.net_heartbeat_interval = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--net-ro-size") && more) {
Modes.net_output_flush_size = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--net-ro-rate") && more) {
Modes.net_output_flush_interval = atoi(argv[++j]) / 15; // backwards compatibility
} else if (!strcmp(argv[j],"--net-ro-interval") && more) {
Modes.net_output_flush_interval = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--net-ro-port") && more) {
if (Modes.beast) // Required for legacy backward compatibility
{Modes.net_output_beast_port = atoi(argv[++j]);;}
else
{Modes.net_output_raw_port = atoi(argv[++j]);}
} else if (!strcmp(argv[j],"--net-ri-port") && more) {
Modes.net_input_raw_port = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--net-bo-port") && more) {
Modes.net_output_beast_port = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--net-bi-port") && more) {
Modes.net_input_beast_port = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--net-bind-address") && more) {
Modes.net_bind_address = strdup(argv[++j]);
} else if (!strcmp(argv[j],"--net-http-port") && more) {
Modes.net_http_port = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--net-fatsv-port") && more) {
Modes.net_fatsv_port = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--net-sbs-port") && more) {
Modes.net_output_sbs_port = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--net-buffer") && more) {
Modes.net_sndbuf_size = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--net-verbatim")) {
Modes.net_verbatim = 1;
} else if (!strcmp(argv[j],"--onlyaddr")) {
Modes.onlyaddr = 1;
} else if (!strcmp(argv[j],"--metric")) {
Modes.metric = 1;
} else if (!strcmp(argv[j],"--aggressive")) {
Modes.nfix_crc = MODES_MAX_BITERRORS;
} else if (!strcmp(argv[j],"--interactive")) {
Modes.interactive = 1;
} else if (!strcmp(argv[j],"--interactive-rows") && more) {
Modes.interactive_rows = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--interactive-ttl") && more) {
Modes.interactive_display_ttl = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--lat") && more) {
Modes.fUserLat = atof(argv[++j]);
} else if (!strcmp(argv[j],"--lon") && more) {
Modes.fUserLon = atof(argv[++j]);
} else if (!strcmp(argv[j],"--max-range") && more) {
Modes.maxRange = atof(argv[++j]) * 1852.0; // convert to metres
} else if (!strcmp(argv[j],"--debug") && more) {
char *f = argv[++j];
while(*f) {
switch(*f) {
case 'D': Modes.debug |= MODES_DEBUG_DEMOD; break;
case 'd': Modes.debug |= MODES_DEBUG_DEMODERR; break;
case 'C': Modes.debug |= MODES_DEBUG_GOODCRC; break;
case 'c': Modes.debug |= MODES_DEBUG_BADCRC; break;
case 'p': Modes.debug |= MODES_DEBUG_NOPREAMBLE; break;
case 'n': Modes.debug |= MODES_DEBUG_NET; break;
case 'j': Modes.debug |= MODES_DEBUG_JS; break;
default:
fprintf(stderr, "Unknown debugging flag: %c\n", *f);
exit(1);
break;
}
f++;
}
} else if (!strcmp(argv[j],"--stats")) {
Modes.stats = -1;
} else if (!strcmp(argv[j],"--stats-every") && more) {
Modes.stats = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--snip") && more) {
snipMode(atoi(argv[++j]));
exit(0);
} else if (!strcmp(argv[j],"--help")) {
showHelp();
exit(0);
} else if (!strcmp(argv[j],"--ppm") && more) {
Modes.ppm_error = atoi(argv[++j]);
} else if (!strcmp(argv[j],"--quiet")) {
Modes.quiet = 1;
} else if (!strcmp(argv[j],"--mlat")) {
Modes.mlat = 1;
} else if (!strcmp(argv[j],"--interactive-rtl1090")) {
Modes.interactive = 1;
Modes.interactive_rtl1090 = 1;
} else if (!strcmp(argv[j],"--oversample")) {
Modes.oversample = 1;
#ifndef _WIN32
} else if (!strcmp(argv[j], "--write-json") && more) {
Modes.json_dir = strdup(argv[++j]);
} else if (!strcmp(argv[j], "--write-json-every") && more) {
Modes.json_interval = atoi(argv[++j]);
if (Modes.json_interval < 1)
Modes.json_interval = 1;
} else if (!strcmp(argv[j], "--json-location-accuracy") && more) {
Modes.json_location_accuracy = atoi(argv[++j]);
#endif
} else {
fprintf(stderr,
"Unknown or not enough arguments for option '%s'.\n\n",
argv[j]);
showHelp();
exit(1);
}
}
#ifdef _WIN32
// Try to comply with the Copyright license conditions for binary distribution
if (!Modes.quiet) {showCopyright();}
#endif
#ifndef _WIN32
// Setup for SIGWINCH for handling lines
if (Modes.interactive) {signal(SIGWINCH, sigWinchCallback);}
#endif
if (Modes.mode_ac && Modes.oversample) {
fprintf(stderr,
"Warning: --modeac is currently ignored when --oversample is used;\n"
" no ModeA/C messages will be decoded.\n");
}
// Initialization
modesInit();
if (Modes.net_only) {
fprintf(stderr,"Net-only mode, no RTL device or file open.\n");
} else if (Modes.filename == NULL) {
if (modesInitRTLSDR() < 0) {
exit(1);
}
} else {
if (Modes.filename[0] == '-' && Modes.filename[1] == '\0') {
Modes.fd = STDIN_FILENO;
} else if ((Modes.fd = open(Modes.filename,
#ifdef _WIN32
(O_RDONLY | O_BINARY)
#else
(O_RDONLY)
#endif
)) == -1) {
perror("Opening data file");
exit(1);
}
}
if (Modes.net) modesInitNet();
// init stats:
Modes.stats_current.start = Modes.stats_current.end = time(NULL);
// write initial json files so they're not missing
writeJsonToFile("receiver.json", generateReceiverJson);
writeJsonToFile("stats.json", generateStatsJson);
writeJsonToFile("aircraft.json", generateAircraftJson);
// If the user specifies --net-only, just run in order to serve network
// clients without reading data from the RTL device
while (Modes.net_only) {
if (Modes.exit) {
display_total_stats();
exit(0); // If we exit net_only nothing further in main()
}
backgroundTasks();
usleep(100000);
}
// Create the thread that will read the data from the device.
pthread_create(&Modes.reader_thread, NULL, readerThreadEntryPoint, NULL);
pthread_mutex_lock(&Modes.data_mutex);
while (Modes.exit == 0) {
struct timespec cpu_start_time, cpu_end_time;
if (Modes.iDataReady == 0) {
pthread_cond_wait(&Modes.data_cond,&Modes.data_mutex); // This unlocks Modes.data_mutex, and waits for Modes.data_cond
continue; // Once (Modes.data_cond) occurs, it locks Modes.data_mutex
}
// Modes.data_mutex is Locked, and (Modes.iDataReady != 0)
if (Modes.iDataReady) { // Check we have new data, just in case!!
Modes.iDataOut &= (MODES_ASYNC_BUF_NUMBER-1); // Just incase
// Translate the next lot of I/Q samples into Modes.magnitude
computeMagnitudeVector(Modes.pData[Modes.iDataOut]);
Modes.stSystemTimeBlk = Modes.stSystemTimeRTL[Modes.iDataOut];
// Update the input buffer pointer queue
Modes.iDataOut = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataOut + 1);
Modes.iDataReady = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataIn - Modes.iDataOut);
// If we lost some blocks, correct the timestamp
if (Modes.iDataLost) {
Modes.timestampBlk += (MODES_ASYNC_BUF_SAMPLES * 6 * Modes.iDataLost);
Modes.stats_current.blocks_dropped += Modes.iDataLost;
Modes.iDataLost = 0;
}
// It's safe to release the lock now
pthread_cond_signal (&Modes.data_cond);
pthread_mutex_unlock(&Modes.data_mutex);
// Process data after releasing the lock, so that the capturing
// thread can read data while we perform computationally expensive
// stuff at the same time.
clock_gettime(CLOCK_THREAD_CPUTIME_ID, &cpu_start_time);
if (Modes.oversample)
demodulate2400(Modes.magnitude, MODES_ASYNC_BUF_SAMPLES);
else
demodulate2000(Modes.magnitude, MODES_ASYNC_BUF_SAMPLES);
clock_gettime(CLOCK_THREAD_CPUTIME_ID, &cpu_end_time);
Modes.stats_current.cputime.tv_sec += (cpu_end_time.tv_sec - cpu_start_time.tv_sec);
Modes.stats_current.cputime.tv_nsec += (cpu_end_time.tv_nsec - cpu_start_time.tv_nsec);
if (Modes.stats_current.cputime.tv_nsec < 0) {
Modes.stats_current.cputime.tv_nsec += 1000000000L;
Modes.stats_current.cputime.tv_sec--;
} else if (Modes.stats_current.cputime.tv_nsec > 1000000000L) {
Modes.stats_current.cputime.tv_nsec -= 1000000000L;
Modes.stats_current.cputime.tv_sec++;
}
// Update the timestamp ready for the next block
if (Modes.oversample)
Modes.timestampBlk += (MODES_ASYNC_BUF_SAMPLES*5);
else
Modes.timestampBlk += (MODES_ASYNC_BUF_SAMPLES*6);
Modes.stats_current.blocks_processed++;
} else {
pthread_cond_signal (&Modes.data_cond);
pthread_mutex_unlock(&Modes.data_mutex);
}
backgroundTasks();
pthread_mutex_lock(&Modes.data_mutex);
}
pthread_mutex_unlock(&Modes.data_mutex);
// If --stats were given, print statistics
if (Modes.stats) {
display_total_stats();
}
if (Modes.filename == NULL) {
rtlsdr_cancel_async(Modes.dev); // Cancel rtlsdr_read_async will cause data input thread to terminate cleanly
}
pthread_join(Modes.reader_thread,NULL); // Wait on reader thread exit
// Nothing is touching the rtlsdr device now.
if (Modes.filename == NULL) {
// This currently causes crashes within libusb for unknown reasons:
//rtlsdr_close(Modes.dev);
}
pthread_cond_destroy(&Modes.data_cond); // Thread cleanup - only after the reader thread is dead!
pthread_mutex_destroy(&Modes.data_mutex);
#ifndef _WIN32
pthread_exit(0);
#else
return (0);
#endif
}
//
//=========================================================================
//
Reference in a new issue View git blame Copy permalink