dump1090-fa (3.7.0~dev) UNRELEASED; urgency=medium * in development -- Oliver Jowett Mon, 04 Mar 2019 15:36:16 +0000 dump1090-fa (3.6.3) stable; urgency=medium * Fix port 30003 output (Basestation) timestamp formatting broken in 3.6.0 * Ignore altitudes in DF17 "airborne" positions with airGround = ground * SkyView layout change and proper support for extended data fields -- Oliver Jowett Tue, 11 Sep 2018 14:52:20 +0100 dump1090-fa (3.6.2) stable; urgency=medium * Update SkyView flags for Libya, Serbia, Montenegro * Improve handling of bad callsigns in ADS-B messages * Update FlightAware aircraft static data export * Add --direct option to enable rtlsdr direct sampling mode -- Oliver Jowett Fri, 27 Jul 2018 18:32:30 +0100 dump1090-fa (3.6.1) stable; urgency=medium * Fix tracking of NICbaro * Don't translate 7x00 to emergency status, it obscures the source of the data (squawk vs ADS-B v2) * Support for building on stretch -- Oliver Jowett Mon, 16 Jul 2018 14:58:59 +0100 dump1090-fa (3.6.0) stable; urgency=medium * dump1090: implement speculative decoding for Comm-B messages, capturing most of the Mode S EHS data: BDS 1,0 (datalink capabilities); BDS 1,7 (GICB capabilities); BDS 2,0 (aircraft identification); BDS 3,0 (ACAS RA); BDS 4,0 (vertical intention); BDS 5,0 (track and turn); BDS 6,0 (heading and speed) * dump1090: implement decoding of most of DO-260A/DO-260B including ADS-B version, autopilot settings, NIC/Rc, NAC, SIL, GVA, etc. * dump1090: aircraft state tracking overhaul; track data age in milliseconds * dump1090: emit newly decoded fields in aircraft.json * Skyview: experimental display of new fields, disabled by default; to enable, set ExtendedData = true in config.js or add #extended to the URL * Skyview: Remove obsolete chartbundle WAC layer, add heli layer * Skyview: Remove Mapzen layer as Mapzen is shutting down * faup1090: Restructure emitted data to include data age and source * faup1090: Include newly decoded fields in reports * dump1090, faup1090: fix use of snprintf to correctly handle buffer overruns * dump1090: don't bother tracking ICAO 000000 -- Oliver Jowett Wed, 09 May 2018 22:34:24 +0100 dump1090-fa (3.5.3) stable; urgency=medium * Skip 3.5.2 to align with piaware versioning * Skyview: Update OpenLayers to fix performance problems on some browsers -- Oliver Jowett Fri, 03 Nov 2017 22:44:40 +0000 dump1090-fa (3.5.1) stable; urgency=medium * Skyview: fix font mappings * Skyview: mark tisb_icao and tisb_other addresses as TIS-B * Skyview: fix unit selection on Firefox * Skyview: report data source correctly in popup * Skyview: change default color for grounded aircraft to brown * Skyview: initial history load speedups (Steven Davies) * Skyview: fix L2T/L2P icon selection * Makefile cleanups (Michael Tatarinov) -- Oliver Jowett Mon, 31 Jul 2017 13:43:32 +0100 dump1090-fa (3.5.0) stable; urgency=medium * SkyView map UI added. * Only enable lighttpd config once, not on every package upgrade in case the user has deliberately disabled it. * Fix AGC gain setting. * Updated the FlightAware aircraft data export. * Minor bugfixes. -- Oliver Jowett Mon, 03 Apr 2017 17:53:48 +0100 dump1090-fa (3.4.0) stable; urgency=medium * Add bladeRF support. * Clean up the FlightAware photos link so it works for registrations containing non-alphanumeric characters. -- Oliver Jowett Thu, 09 Feb 2017 17:41:43 +0000 dump1090-fa (3.3.0) stable; urgency=medium * Improvements to the Mode A/C demodulator. * Automatically enable Mode A/C if a Beast command requesting it is received. (disable with --no-modeac-auto) * Process the radarcape position message, emit it from faup1090. * If view1090 is started with --modeac, request Mode A/C data from dump1090. * Remove the last traces of the internal webserver. * Updated the FlightAware aircraft data export. * Updated the default package-based maximum range to 360NM to match what piaware-support configured for sdcard installs. * Remove internal webserver code entirely (previously, it was just disabled at compile time). * Tweak the timing reported for Mode S and Mode A/C messages to match how the Beast/Radarcape does it. This affects the interval between Mode S and Mode A/C messages only; intervals between Mode S messages and other Mode S messages, or A/C and other A/C, are unchanged. -- Oliver Jowett Sun, 15 Jan 2017 13:35:56 +0000 dump1090-fa (3.2.0) stable; urgency=medium * Fix a stray extra comma in port 30003 output if only GNSS altitude was available * Track CPR encoding type directly rather than inferring it from airground; using airground meant some position messages that should be usable were not used * Mode A/C aircraft association tuning, allows dump1090 to handle much higher A/C rates without chewing tons of CPU * Map: Decrease the maximum marker size shown * Map: Show additional datasource information (TIS-B etc) in table mode * Map: Move the datablock so it doesn't overlap the zoom control * Map: Allow skipping the history load by adding a #nohistory fragment to the URL (e.g. for high latency connections) * view1090-fa: Use ncurses to reduce flicker on remote connections * view1090-fa: Fix knots -> km/h conversion in interactive mode -- Oliver Jowett Tue, 25 Oct 2016 23:40:01 +0100 dump1090-fa (3.1.0) stable; urgency=medium * Update to latest dump1090-mutability master * Preserve more map settings in browser local storage * Add a NEXRAD weather layer (US only) to the map * Decoder overhaul/cleanup * Prefer ES data over Mode S data when both are available * Improved air/ground detection * Lots of map interface changes: * aircraft info moves to a draggable popup rather than top of the sidebar * sidebar is resizeable / hideable * table-only (no map) mode * improved FlightAware aircraft links * configurable units display (metric / imperial / aeronautical) * filter displayed aircraft by altitude * option to show all aircraft tracks * more aircraft markers * use aircraft markers based on aircraft type info where available * scale marker size based on zoom to avoid overlap when zoomed out * Include a greatly expanded aircraft type/registration database (used by the map display) based on the publically-distributable parts of FlightAware's internal database * Try to compute a registration from ICAO address for aircraft where there is a predictable mapping (e.g. US N-registrations) * Try to coexist with other packages (e.g. dump1090-mutability) that also provide a lighttpd config that changes the server.stat-cache-engine setting * Serve actual map data on port 8080, not just a redirect * Redirect requests for /dump1090-fa to /dump1090-fa/ rather than 404ing. -- Oliver Jowett Thu, 22 Sep 2016 17:19:01 +0100 dump1090-fa (3.0.5) stable; urgency=medium * No-change release for PiAware 3.0.5 -- Oliver Jowett Wed, 31 Aug 2016 13:02:42 +0100 dump1090-fa (3.0.3) stable; urgency=medium * No-change release for PiAware 3.0.3 -- Oliver Jowett Mon, 01 Aug 2016 12:23:47 +0100 dump1090-fa (3.0.2) stable; urgency=medium * Release for PiAware 3.0.2 * Correct the radius of the receiver range circles * Fix errors when selecting a positionless aircraft via the table * Improve Mode A/C reception * Add a Bing roadmap layer option (with a Bing API key) -- Oliver Jowett Wed, 27 Jul 2016 17:12:53 +0100 dump1090-fa (3.0.1) stable; urgency=medium * PiAware 3.0.1 -- Oliver Jowett Fri, 15 Jul 2016 13:04:47 +0100 dump1090-fa (3.0~flightfeeder) stable; urgency=medium * New release series based on dump1090-mutability. * Initial 3.0 release for FlightFeeder images. -- Oliver Jowett Mon, 11 Jan 2016 17:20:05 +0000