// Part of dump1090, a Mode S message decoder for RTLSDR devices. // // dump1090.c: main program & miscellany // // Copyright (c) 2014,2015 Oliver Jowett // // This file is free software: you may copy, redistribute and/or modify it // under the terms of the GNU General Public License as published by the // Free Software Foundation, either version 2 of the License, or (at your // option) any later version. // // This file is distributed in the hope that it will be useful, but // WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program. If not, see . // This file incorporates work covered by the following copyright and // permission notice: // // Copyright (C) 2012 by Salvatore Sanfilippo // // All rights reserved. // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions are // met: // // * Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // // * Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the distribution. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT // HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #include "dump1090.h" #include static int verbose_device_search(char *s); // // ============================= Utility functions ========================== // static void log_with_timestamp(const char *format, ...) __attribute__((format (printf, 1, 2) )); static void log_with_timestamp(const char *format, ...) { char timebuf[128]; char msg[1024]; time_t now; struct tm local; va_list ap; now = time(NULL); localtime_r(&now, &local); strftime(timebuf, 128, "%c %Z", &local); timebuf[127] = 0; va_start(ap, format); vsnprintf(msg, 1024, format, ap); va_end(ap); msg[1023] = 0; fprintf(stderr, "%s %s\n", timebuf, msg); } static void sigintHandler(int dummy) { MODES_NOTUSED(dummy); signal(SIGINT, SIG_DFL); // reset signal handler - bit extra safety Modes.exit = 1; // Signal to threads that we are done log_with_timestamp("Caught SIGINT, shutting down..\n"); } static void sigtermHandler(int dummy) { MODES_NOTUSED(dummy); signal(SIGTERM, SIG_DFL); // reset signal handler - bit extra safety Modes.exit = 1; // Signal to threads that we are done log_with_timestamp("Caught SIGTERM, shutting down..\n"); } // // =============================== Terminal handling ======================== // #ifndef _WIN32 // Get the number of rows after the terminal changes size. int getTermRows() { struct winsize w; ioctl(STDOUT_FILENO, TIOCGWINSZ, &w); return (w.ws_row); } // Handle resizing terminal void sigWinchCallback() { signal(SIGWINCH, SIG_IGN); Modes.interactive_rows = getTermRows(); interactiveShowData(); signal(SIGWINCH, sigWinchCallback); } #else int getTermRows() { return MODES_INTERACTIVE_ROWS;} #endif static void start_cpu_timing(struct timespec *start_time) { clock_gettime(CLOCK_THREAD_CPUTIME_ID, start_time); } static void end_cpu_timing(const struct timespec *start_time, struct timespec *add_to) { struct timespec end_time; clock_gettime(CLOCK_THREAD_CPUTIME_ID, &end_time); add_to->tv_sec += (end_time.tv_sec - start_time->tv_sec - 1); add_to->tv_nsec += (1000000000L + end_time.tv_nsec - start_time->tv_nsec); add_to->tv_sec += add_to->tv_nsec / 1000000000L; add_to->tv_nsec = add_to->tv_nsec % 1000000000L; } // // =============================== Initialization =========================== // void modesInitConfig(void) { // Default everything to zero/NULL memset(&Modes, 0, sizeof(Modes)); // Now initialise things that should not be 0/NULL to their defaults Modes.gain = MODES_MAX_GAIN; Modes.freq = MODES_DEFAULT_FREQ; Modes.ppm_error = MODES_DEFAULT_PPM; Modes.check_crc = 1; Modes.net_heartbeat_interval = MODES_NET_HEARTBEAT_INTERVAL; Modes.net_output_sbs_port = MODES_NET_OUTPUT_SBS_PORT; Modes.net_output_raw_port = MODES_NET_OUTPUT_RAW_PORT; Modes.net_input_raw_port = MODES_NET_INPUT_RAW_PORT; Modes.net_output_beast_port = MODES_NET_OUTPUT_BEAST_PORT; Modes.net_input_beast_port = MODES_NET_INPUT_BEAST_PORT; Modes.net_http_port = MODES_NET_HTTP_PORT; Modes.net_fatsv_port = MODES_NET_OUTPUT_FA_TSV_PORT; Modes.interactive_rows = getTermRows(); Modes.interactive_display_ttl = MODES_INTERACTIVE_DISPLAY_TTL; Modes.json_interval = 1000; Modes.json_location_accuracy = 1; Modes.maxRange = 1852 * 300; // 300NM default max range } // //========================================================================= // void modesInit(void) { int i, q; pthread_mutex_init(&Modes.data_mutex,NULL); pthread_cond_init(&Modes.data_cond,NULL); // Allocate the various buffers used by Modes Modes.trailing_samples = (Modes.oversample ? (MODES_OS_PREAMBLE_SAMPLES + MODES_OS_LONG_MSG_SAMPLES) : (MODES_PREAMBLE_SAMPLES + MODES_LONG_MSG_SAMPLES)) + 16; if ( ((Modes.pFileData = (uint16_t *) malloc(MODES_ASYNC_BUF_SIZE) ) == NULL) || ((Modes.magnitude = (uint16_t *) calloc(MODES_ASYNC_BUF_SAMPLES+Modes.trailing_samples, 2) ) == NULL) || ((Modes.maglut = (uint16_t *) malloc(sizeof(uint16_t) * 256 * 256) ) == NULL) || ((Modes.log10lut = (uint16_t *) malloc(sizeof(uint16_t) * 256 * 256) ) == NULL) ) { fprintf(stderr, "Out of memory allocating data buffer.\n"); exit(1); } // Clear the buffers that have just been allocated, just in-case memset(Modes.pFileData,127, MODES_ASYNC_BUF_SIZE); // Validate the users Lat/Lon home location inputs if ( (Modes.fUserLat > 90.0) // Latitude must be -90 to +90 || (Modes.fUserLat < -90.0) // and || (Modes.fUserLon > 360.0) // Longitude must be -180 to +360 || (Modes.fUserLon < -180.0) ) { Modes.fUserLat = Modes.fUserLon = 0.0; } else if (Modes.fUserLon > 180.0) { // If Longitude is +180 to +360, make it -180 to 0 Modes.fUserLon -= 360.0; } // If both Lat and Lon are 0.0 then the users location is either invalid/not-set, or (s)he's in the // Atlantic ocean off the west coast of Africa. This is unlikely to be correct. // Set the user LatLon valid flag only if either Lat or Lon are non zero. Note the Greenwich meridian // is at 0.0 Lon,so we must check for either fLat or fLon being non zero not both. // Testing the flag at runtime will be much quicker than ((fLon != 0.0) || (fLat != 0.0)) Modes.bUserFlags &= ~MODES_USER_LATLON_VALID; if ((Modes.fUserLat != 0.0) || (Modes.fUserLon != 0.0)) { Modes.bUserFlags |= MODES_USER_LATLON_VALID; } // Limit the maximum requested raw output size to less than one Ethernet Block if (Modes.net_output_flush_size > (MODES_OUT_FLUSH_SIZE)) {Modes.net_output_flush_size = MODES_OUT_FLUSH_SIZE;} if (Modes.net_output_flush_interval > (MODES_OUT_FLUSH_INTERVAL)) {Modes.net_output_flush_interval = MODES_OUT_FLUSH_INTERVAL;} if (Modes.net_sndbuf_size > (MODES_NET_SNDBUF_MAX)) {Modes.net_sndbuf_size = MODES_NET_SNDBUF_MAX;} // Initialise the Block Timers to something half sensible clock_gettime(CLOCK_REALTIME, &Modes.stSystemTimeBlk); for (i = 0; i < MODES_ASYNC_BUF_NUMBER; i++) {Modes.stSystemTimeRTL[i] = Modes.stSystemTimeBlk;} // Each I and Q value varies from 0 to 255, which represents a range from -1 to +1. To get from the // unsigned (0-255) range you therefore subtract 127 (or 128 or 127.5) from each I and Q, giving you // a range from -127 to +128 (or -128 to +127, or -127.5 to +127.5).. // // To decode the AM signal, you need the magnitude of the waveform, which is given by sqrt((I^2)+(Q^2)) // The most this could be is if I&Q are both 128 (or 127 or 127.5), so you could end up with a magnitude // of 181.019 (or 179.605, or 180.312) // // However, in reality the magnitude of the signal should never exceed the range -1 to +1, because the // values are I = rCos(w) and Q = rSin(w). Therefore the integer computed magnitude should (can?) never // exceed 128 (or 127, or 127.5 or whatever) // // If we scale up the results so that they range from 0 to 65535 (16 bits) then we need to multiply // by 511.99, (or 516.02 or 514). antirez's original code multiplies by 360, presumably because he's // assuming the maximim calculated amplitude is 181.019, and (181.019 * 360) = 65166. // // So lets see if we can improve things by subtracting 127.5, Well in integer arithmatic we can't // subtract half, so, we'll double everything up and subtract one, and then compensate for the doubling // in the multiplier at the end. // // If we do this we can never have I or Q equal to 0 - they can only be as small as +/- 1. // This gives us a minimum magnitude of root 2 (0.707), so the dynamic range becomes (1.414-255). This // also affects our scaling value, which is now 65535/(255 - 1.414), or 258.433254 // // The sums then become mag = 258.433254 * (sqrt((I*2-255)^2 + (Q*2-255)^2) - 1.414) // or mag = (258.433254 * sqrt((I*2-255)^2 + (Q*2-255)^2)) - 365.4798 // // We also need to clip mag just incaes any rogue I/Q values somehow do have a magnitude greater than 255. // for (i = 0; i <= 255; i++) { for (q = 0; q <= 255; q++) { int mag, mag_i, mag_q; mag_i = (i * 2) - 255; mag_q = (q * 2) - 255; mag = (int) round((sqrt((mag_i*mag_i)+(mag_q*mag_q)) * 258.433254) - 365.4798); Modes.maglut[(i*256)+q] = (uint16_t) ((mag < 65535) ? mag : 65535); } } // Prepare the log10 lookup table. // This maps from a magnitude value x (scaled as above) to 100log10(x) for (i = 0; i <= 65535; i++) { int l10 = (int) round(100 * log10( (i + 365.4798) / 258.433254) ); Modes.log10lut[i] = (uint16_t) ((l10 < 65535 ? l10 : 65535)); } // Prepare error correction tables modesChecksumInit(Modes.nfix_crc); icaoFilterInit(); if (Modes.show_only) icaoFilterAdd(Modes.show_only); } // // =============================== RTLSDR handling ========================== // int modesInitRTLSDR(void) { int j; int device_count, dev_index = 0; char vendor[256], product[256], serial[256]; if (Modes.dev_name) { if ( (dev_index = verbose_device_search(Modes.dev_name)) < 0 ) return -1; } device_count = rtlsdr_get_device_count(); if (!device_count) { fprintf(stderr, "No supported RTLSDR devices found.\n"); return -1; } fprintf(stderr, "Found %d device(s):\n", device_count); for (j = 0; j < device_count; j++) { rtlsdr_get_device_usb_strings(j, vendor, product, serial); fprintf(stderr, "%d: %s, %s, SN: %s %s\n", j, vendor, product, serial, (j == dev_index) ? "(currently selected)" : ""); } if (rtlsdr_open(&Modes.dev, dev_index) < 0) { fprintf(stderr, "Error opening the RTLSDR device: %s\n", strerror(errno)); return -1; } // Set gain, frequency, sample rate, and reset the device rtlsdr_set_tuner_gain_mode(Modes.dev, (Modes.gain == MODES_AUTO_GAIN) ? 0 : 1); if (Modes.gain != MODES_AUTO_GAIN) { int *gains; int numgains; numgains = rtlsdr_get_tuner_gains(Modes.dev, NULL); if (numgains <= 0) { fprintf(stderr, "Error getting tuner gains\n"); return -1; } gains = malloc(numgains * sizeof(int)); if (rtlsdr_get_tuner_gains(Modes.dev, gains) != numgains) { fprintf(stderr, "Error getting tuner gains\n"); free(gains); return -1; } if (Modes.gain == MODES_MAX_GAIN) { int highest = -1; int i; for (i = 0; i < numgains; ++i) { if (gains[i] > highest) highest = gains[i]; } Modes.gain = highest; fprintf(stderr, "Max available gain is: %.2f dB\n", Modes.gain/10.0); } else { int closest = -1; int i; for (i = 0; i < numgains; ++i) { if (closest == -1 || abs(gains[i] - Modes.gain) < abs(closest - Modes.gain)) closest = gains[i]; } if (closest != Modes.gain) { Modes.gain = closest; fprintf(stderr, "Closest available gain: %.2f dB\n", Modes.gain/10.0); } } free(gains); fprintf(stderr, "Setting gain to: %.2f dB\n", Modes.gain/10.0); if (rtlsdr_set_tuner_gain(Modes.dev, Modes.gain) < 0) { fprintf(stderr, "Error setting tuner gains\n"); return -1; } } else { fprintf(stderr, "Using automatic gain control.\n"); } rtlsdr_set_freq_correction(Modes.dev, Modes.ppm_error); if (Modes.enable_agc) rtlsdr_set_agc_mode(Modes.dev, 1); rtlsdr_set_center_freq(Modes.dev, Modes.freq); rtlsdr_set_sample_rate(Modes.dev, Modes.oversample ? MODES_OVERSAMPLE_RATE : MODES_DEFAULT_RATE); rtlsdr_reset_buffer(Modes.dev); fprintf(stderr, "Gain reported by device: %.2f dB\n", rtlsdr_get_tuner_gain(Modes.dev)/10.0); return 0; } // //========================================================================= // // We use a thread reading data in background, while the main thread // handles decoding and visualization of data to the user. // // The reading thread calls the RTLSDR API to read data asynchronously, and // uses a callback to populate the data buffer. // // A Mutex is used to avoid races with the decoding thread. // static struct timespec reader_thread_start; void rtlsdrCallback(unsigned char *buf, uint32_t len, void *ctx) { MODES_NOTUSED(ctx); // Lock the data buffer variables before accessing them pthread_mutex_lock(&Modes.data_mutex); if (Modes.exit) { rtlsdr_cancel_async(Modes.dev); // ask our caller to exit } Modes.iDataIn &= (MODES_ASYNC_BUF_NUMBER-1); // Just incase!!! // Get the system time for this block clock_gettime(CLOCK_REALTIME, &Modes.stSystemTimeRTL[Modes.iDataIn]); if (len > MODES_ASYNC_BUF_SIZE) {len = MODES_ASYNC_BUF_SIZE;} // Queue the new data Modes.pData[Modes.iDataIn] = (uint16_t *) buf; Modes.iDataIn = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataIn + 1); Modes.iDataReady = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataIn - Modes.iDataOut); if (Modes.iDataReady == 0) { // Ooooops. We've just received the MODES_ASYNC_BUF_NUMBER'th outstanding buffer // This means that RTLSDR is currently overwriting the MODES_ASYNC_BUF_NUMBER+1 // buffer, but we havent yet processed it, so we're going to lose it. There // isn't much we can do to recover the lost data, but we can correct things to // avoid any additional problems. Modes.iDataOut = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataOut+1); Modes.iDataReady = (MODES_ASYNC_BUF_NUMBER-1); Modes.iDataLost++; } // accumulate CPU while holding the mutex, and restart measurement end_cpu_timing(&reader_thread_start, &Modes.reader_cpu_accumulator); start_cpu_timing(&reader_thread_start); // Signal to the other thread that new data is ready, and unlock pthread_cond_signal(&Modes.data_cond); pthread_mutex_unlock(&Modes.data_mutex); } // //========================================================================= // // This is used when --ifile is specified in order to read data from file // instead of using an RTLSDR device // void readDataFromFile(void) { pthread_mutex_lock(&Modes.data_mutex); while(Modes.exit == 0) { ssize_t nread, toread; unsigned char *p; if (Modes.iDataReady) { pthread_cond_wait(&Modes.data_cond, &Modes.data_mutex); continue; } if (Modes.interactive) { // When --ifile and --interactive are used together, slow down // playing at the natural rate of the RTLSDR received. pthread_mutex_unlock(&Modes.data_mutex); usleep(64000); pthread_mutex_lock(&Modes.data_mutex); } toread = MODES_ASYNC_BUF_SIZE; p = (unsigned char *) Modes.pFileData; while(toread) { nread = read(Modes.fd, p, toread); if (nread <= 0) { // Done. Modes.exit = 1; // Signal the other threads to exit. goto OUT; } p += nread; toread -= nread; } if (toread) { // Not enough data on file to fill the buffer? Pad with no signal. memset(p,127,toread); } Modes.iDataIn &= (MODES_ASYNC_BUF_NUMBER-1); // Just incase!!! // Get the system time for this block clock_gettime(CLOCK_REALTIME, &Modes.stSystemTimeRTL[Modes.iDataIn]); // Queue the new data Modes.pData[Modes.iDataIn] = Modes.pFileData; Modes.iDataIn = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataIn + 1); Modes.iDataReady = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataIn - Modes.iDataOut); // accumulate CPU while holding the mutex, and restart measurement end_cpu_timing(&reader_thread_start, &Modes.reader_cpu_accumulator); start_cpu_timing(&reader_thread_start); // Signal to the other thread that new data is ready pthread_cond_signal(&Modes.data_cond); } OUT: pthread_mutex_unlock(&Modes.data_mutex); } // //========================================================================= // // We read data using a thread, so the main thread only handles decoding // without caring about data acquisition // void *readerThreadEntryPoint(void *arg) { MODES_NOTUSED(arg); start_cpu_timing(&reader_thread_start); // we accumulate in rtlsdrCallback() or readDataFromFile() if (Modes.filename == NULL) { while (!Modes.exit) { rtlsdr_read_async(Modes.dev, rtlsdrCallback, NULL, MODES_ASYNC_BUF_NUMBER, MODES_ASYNC_BUF_SIZE); if (!Modes.exit) { log_with_timestamp("Warning: lost the connection to the RTLSDR device."); rtlsdr_close(Modes.dev); Modes.dev = NULL; do { sleep(5); log_with_timestamp("Trying to reconnect to the RTLSDR device.."); } while (!Modes.exit && modesInitRTLSDR() < 0); } } if (Modes.dev != NULL) { rtlsdr_close(Modes.dev); Modes.dev = NULL; } } else { readDataFromFile(); } // Wake the main thread (if it's still waiting) pthread_mutex_lock(&Modes.data_mutex); Modes.exit = 1; // just in case pthread_cond_signal(&Modes.data_cond); pthread_mutex_unlock(&Modes.data_mutex); #ifndef _WIN32 pthread_exit(NULL); #else return NULL; #endif } // // ============================== Snip mode ================================= // // Get raw IQ samples and filter everything is < than the specified level // for more than 256 samples in order to reduce example file size // void snipMode(int level) { int i, q; uint64_t c = 0; while ((i = getchar()) != EOF && (q = getchar()) != EOF) { if (abs(i-127) < level && abs(q-127) < level) { c++; if (c > MODES_PREAMBLE_SIZE) continue; } else { c = 0; } putchar(i); putchar(q); } } // // ================================ Main ==================================== // void showHelp(void) { printf( "-----------------------------------------------------------------------------\n" "| dump1090 ModeS Receiver %45s |\n" "-----------------------------------------------------------------------------\n" "--device-index Select RTL device (default: 0)\n" "--gain Set gain (default: max gain. Use -10 for auto-gain)\n" "--enable-agc Enable the Automatic Gain Control (default: off)\n" "--freq Set frequency (default: 1090 Mhz)\n" "--ifile Read data from file (use '-' for stdin)\n" "--interactive Interactive mode refreshing data on screen\n" "--interactive-rows Max number of rows in interactive mode (default: 15)\n" "--interactive-ttl Remove from list if idle for (default: 60)\n" "--interactive-rtl1090 Display flight table in RTL1090 format\n" "--raw Show only messages hex values\n" "--net Enable networking\n" "--modeac Enable decoding of SSR Modes 3/A & 3/C\n" "--net-only Enable just networking, no RTL device or file used\n" "--net-bind-address IP address to bind to (default: Any; Use 127.0.0.1 for private)\n" "--net-http-port HTTP server port (default: 8080)\n" "--net-ri-port TCP raw input listen port (default: 30001)\n" "--net-ro-port TCP raw output listen port (default: 30002)\n" "--net-sbs-port TCP BaseStation output listen port (default: 30003)\n" "--net-bi-port TCP Beast input listen port (default: 30004)\n" "--net-bo-port TCP Beast output listen port (default: 30005)\n" "--net-fatsv-port FlightAware TSV output port (default: 10001)\n" "--net-ro-size TCP output minimum size (default: 0)\n" "--net-ro-interval TCP output memory flush rate in seconds (default: 0)\n" "--net-heartbeat TCP heartbeat rate in seconds (default: 60 sec; 0 to disable)\n" "--net-buffer TCP buffer size 64Kb * (2^n) (default: n=0, 64Kb)\n" "--net-verbatim Do not apply CRC corrections to messages we forward; send unchanged\n" "--lat Reference/receiver latitude for surface posn (opt)\n" "--lon Reference/receiver longitude for surface posn (opt)\n" "--max-range Absolute maximum range for position decoding (in nm, default: 300)\n" "--fix Enable single-bits error correction using CRC\n" "--no-fix Disable single-bits error correction using CRC\n" "--no-crc-check Disable messages with broken CRC (discouraged)\n" "--phase-enhance Enable phase enhancement\n" "--aggressive More CPU for more messages (two bits fixes, ...)\n" "--mlat display raw messages in Beast ascii mode\n" "--stats With --ifile print stats at exit. No other output\n" "--stats-every Show and reset stats every seconds\n" "--onlyaddr Show only ICAO addresses (testing purposes)\n" "--metric Use metric units (meters, km/h, ...)\n" "--snip Strip IQ file removing samples < level\n" "--debug Debug mode (verbose), see README for details\n" "--quiet Disable output to stdout. Use for daemon applications\n" "--show-only Show only messages from the given ICAO on stdout\n" "--ppm Set receiver error in parts per million (default 0)\n" "--no-decode Don't decode the message contents beyond the minimum necessary\n" "--write-json Periodically write json output to (for serving by a separate webserver)\n" "--write-json-every Write json output every t seconds (default 1)\n" "--json-location-accuracy Accuracy of receiver location in json metadata: 0=no location, 1=approximate, 2=exact\n" "--oversample Enable oversampling at 2.4MHz\n" "--help Show this help\n" "\n" "Debug mode flags: d = Log frames decoded with errors\n" " D = Log frames decoded with zero errors\n" " c = Log frames with bad CRC\n" " C = Log frames with good CRC\n" " p = Log frames with bad preamble\n" " n = Log network debugging info\n" " j = Log frames to frames.js, loadable by debug.html\n", MODES_DUMP1090_VARIANT " " MODES_DUMP1090_VERSION ); } static void display_total_stats(void) { struct stats added; add_stats(&Modes.stats_alltime, &Modes.stats_current, &added); display_stats(&added); } // //========================================================================= // // This function is called a few times every second by main in order to // perform tasks we need to do continuously, like accepting new clients // from the net, refreshing the screen in interactive mode, and so forth // void backgroundTasks(void) { static uint64_t next_stats_display; static uint64_t next_stats_update; static uint64_t next_json, next_history; uint64_t now = mstime(); icaoFilterExpire(); trackPeriodicUpdate(); if (Modes.net) { modesNetPeriodicWork(); } // Refresh screen when in interactive mode if (Modes.interactive) { interactiveShowData(); } // always update end time so it is current when requests arrive Modes.stats_current.end = now; if (now >= next_stats_update) { int i; if (next_stats_update == 0) { next_stats_update = now + 60000; } else { Modes.stats_latest_1min = (Modes.stats_latest_1min + 1) % 15; Modes.stats_1min[Modes.stats_latest_1min] = Modes.stats_current; add_stats(&Modes.stats_current, &Modes.stats_alltime, &Modes.stats_alltime); add_stats(&Modes.stats_current, &Modes.stats_periodic, &Modes.stats_periodic); reset_stats(&Modes.stats_5min); for (i = 0; i < 5; ++i) add_stats(&Modes.stats_1min[(Modes.stats_latest_1min - i + 15) % 15], &Modes.stats_5min, &Modes.stats_5min); reset_stats(&Modes.stats_15min); for (i = 0; i < 15; ++i) add_stats(&Modes.stats_1min[i], &Modes.stats_15min, &Modes.stats_15min); reset_stats(&Modes.stats_current); Modes.stats_current.start = Modes.stats_current.end = now; if (Modes.json_dir) writeJsonToFile("stats.json", generateStatsJson); next_stats_update += 60000; } } if (Modes.stats && now >= next_stats_display) { if (next_stats_display == 0) { next_stats_display = now + Modes.stats; } else { add_stats(&Modes.stats_periodic, &Modes.stats_current, &Modes.stats_periodic); display_stats(&Modes.stats_periodic); reset_stats(&Modes.stats_periodic); next_stats_display += Modes.stats; } } if (Modes.json_dir && now >= next_json) { writeJsonToFile("aircraft.json", generateAircraftJson); next_json = now + Modes.json_interval; } if ((Modes.json_dir || Modes.net_http_port) && now >= next_history) { int rewrite_receiver_json = (Modes.json_aircraft_history[HISTORY_SIZE-1].content == NULL); free(Modes.json_aircraft_history[Modes.json_aircraft_history_next].content); // might be NULL, that's OK. Modes.json_aircraft_history[Modes.json_aircraft_history_next].content = generateAircraftJson("/data/aircraft.json", &Modes.json_aircraft_history[Modes.json_aircraft_history_next].clen); if (Modes.json_dir) { char filebuf[PATH_MAX]; snprintf(filebuf, PATH_MAX, "history_%d.json", Modes.json_aircraft_history_next); writeJsonToFile(filebuf, generateHistoryJson); } Modes.json_aircraft_history_next = (Modes.json_aircraft_history_next+1) % HISTORY_SIZE; if (rewrite_receiver_json) writeJsonToFile("receiver.json", generateReceiverJson); // number of history entries changed next_history = now + HISTORY_INTERVAL; } } // //========================================================================= // int verbose_device_search(char *s) { int i, device_count, device, offset; char *s2; char vendor[256], product[256], serial[256]; device_count = rtlsdr_get_device_count(); if (!device_count) { fprintf(stderr, "No supported devices found.\n"); return -1; } fprintf(stderr, "Found %d device(s):\n", device_count); for (i = 0; i < device_count; i++) { rtlsdr_get_device_usb_strings(i, vendor, product, serial); fprintf(stderr, " %d: %s, %s, SN: %s\n", i, vendor, product, serial); } fprintf(stderr, "\n"); /* does string look like raw id number */ device = (int)strtol(s, &s2, 0); if (s2[0] == '\0' && device >= 0 && device < device_count) { fprintf(stderr, "Using device %d: %s\n", device, rtlsdr_get_device_name((uint32_t)device)); return device; } /* does string exact match a serial */ for (i = 0; i < device_count; i++) { rtlsdr_get_device_usb_strings(i, vendor, product, serial); if (strcmp(s, serial) != 0) { continue;} device = i; fprintf(stderr, "Using device %d: %s\n", device, rtlsdr_get_device_name((uint32_t)device)); return device; } /* does string prefix match a serial */ for (i = 0; i < device_count; i++) { rtlsdr_get_device_usb_strings(i, vendor, product, serial); if (strncmp(s, serial, strlen(s)) != 0) { continue;} device = i; fprintf(stderr, "Using device %d: %s\n", device, rtlsdr_get_device_name((uint32_t)device)); return device; } /* does string suffix match a serial */ for (i = 0; i < device_count; i++) { rtlsdr_get_device_usb_strings(i, vendor, product, serial); offset = strlen(serial) - strlen(s); if (offset < 0) { continue;} if (strncmp(s, serial+offset, strlen(s)) != 0) { continue;} device = i; fprintf(stderr, "Using device %d: %s\n", device, rtlsdr_get_device_name((uint32_t)device)); return device; } fprintf(stderr, "No matching devices found.\n"); return -1; } // //========================================================================= // int main(int argc, char **argv) { int j; // Set sane defaults modesInitConfig(); // signal handlers: signal(SIGINT, sigintHandler); signal(SIGTERM, sigtermHandler); // Parse the command line options for (j = 1; j < argc; j++) { int more = j+1 < argc; // There are more arguments if (!strcmp(argv[j],"--device-index") && more) { Modes.dev_name = strdup(argv[++j]); } else if (!strcmp(argv[j],"--gain") && more) { Modes.gain = (int) (atof(argv[++j])*10); // Gain is in tens of DBs } else if (!strcmp(argv[j],"--enable-agc")) { Modes.enable_agc++; } else if (!strcmp(argv[j],"--freq") && more) { Modes.freq = (int) strtoll(argv[++j],NULL,10); } else if (!strcmp(argv[j],"--ifile") && more) { Modes.filename = strdup(argv[++j]); } else if (!strcmp(argv[j],"--fix")) { Modes.nfix_crc = 1; } else if (!strcmp(argv[j],"--no-fix")) { Modes.nfix_crc = 0; } else if (!strcmp(argv[j],"--no-crc-check")) { Modes.check_crc = 0; } else if (!strcmp(argv[j],"--phase-enhance")) { Modes.phase_enhance = 1; } else if (!strcmp(argv[j],"--raw")) { Modes.raw = 1; } else if (!strcmp(argv[j],"--net")) { Modes.net = 1; } else if (!strcmp(argv[j],"--modeac")) { Modes.mode_ac = 1; } else if (!strcmp(argv[j],"--net-beast")) { Modes.beast = 1; } else if (!strcmp(argv[j],"--net-only")) { Modes.net = 1; Modes.net_only = 1; } else if (!strcmp(argv[j],"--net-heartbeat") && more) { Modes.net_heartbeat_interval = (uint64_t)(1000 * atof(argv[++j])); } else if (!strcmp(argv[j],"--net-ro-size") && more) { Modes.net_output_flush_size = atoi(argv[++j]); } else if (!strcmp(argv[j],"--net-ro-rate") && more) { Modes.net_output_flush_interval = 1000 * atoi(argv[++j]) / 15; // backwards compatibility } else if (!strcmp(argv[j],"--net-ro-interval") && more) { Modes.net_output_flush_interval = (uint64_t)(1000 * atof(argv[++j])); } else if (!strcmp(argv[j],"--net-ro-port") && more) { if (Modes.beast) // Required for legacy backward compatibility {Modes.net_output_beast_port = atoi(argv[++j]);;} else {Modes.net_output_raw_port = atoi(argv[++j]);} } else if (!strcmp(argv[j],"--net-ri-port") && more) { Modes.net_input_raw_port = atoi(argv[++j]); } else if (!strcmp(argv[j],"--net-bo-port") && more) { Modes.net_output_beast_port = atoi(argv[++j]); } else if (!strcmp(argv[j],"--net-bi-port") && more) { Modes.net_input_beast_port = atoi(argv[++j]); } else if (!strcmp(argv[j],"--net-bind-address") && more) { Modes.net_bind_address = strdup(argv[++j]); } else if (!strcmp(argv[j],"--net-http-port") && more) { Modes.net_http_port = atoi(argv[++j]); } else if (!strcmp(argv[j],"--net-fatsv-port") && more) { Modes.net_fatsv_port = atoi(argv[++j]); } else if (!strcmp(argv[j],"--net-sbs-port") && more) { Modes.net_output_sbs_port = atoi(argv[++j]); } else if (!strcmp(argv[j],"--net-buffer") && more) { Modes.net_sndbuf_size = atoi(argv[++j]); } else if (!strcmp(argv[j],"--net-verbatim")) { Modes.net_verbatim = 1; } else if (!strcmp(argv[j],"--onlyaddr")) { Modes.onlyaddr = 1; } else if (!strcmp(argv[j],"--metric")) { Modes.metric = 1; } else if (!strcmp(argv[j],"--aggressive")) { Modes.nfix_crc = MODES_MAX_BITERRORS; } else if (!strcmp(argv[j],"--interactive")) { Modes.interactive = 1; } else if (!strcmp(argv[j],"--interactive-rows") && more) { Modes.interactive_rows = atoi(argv[++j]); } else if (!strcmp(argv[j],"--interactive-ttl") && more) { Modes.interactive_display_ttl = (uint64_t)(1000 * atof(argv[++j])); } else if (!strcmp(argv[j],"--lat") && more) { Modes.fUserLat = atof(argv[++j]); } else if (!strcmp(argv[j],"--lon") && more) { Modes.fUserLon = atof(argv[++j]); } else if (!strcmp(argv[j],"--max-range") && more) { Modes.maxRange = atof(argv[++j]) * 1852.0; // convert to metres } else if (!strcmp(argv[j],"--debug") && more) { char *f = argv[++j]; while(*f) { switch(*f) { case 'D': Modes.debug |= MODES_DEBUG_DEMOD; break; case 'd': Modes.debug |= MODES_DEBUG_DEMODERR; break; case 'C': Modes.debug |= MODES_DEBUG_GOODCRC; break; case 'c': Modes.debug |= MODES_DEBUG_BADCRC; break; case 'p': Modes.debug |= MODES_DEBUG_NOPREAMBLE; break; case 'n': Modes.debug |= MODES_DEBUG_NET; break; case 'j': Modes.debug |= MODES_DEBUG_JS; break; default: fprintf(stderr, "Unknown debugging flag: %c\n", *f); exit(1); break; } f++; } } else if (!strcmp(argv[j],"--stats")) { if (!Modes.stats) Modes.stats = (uint64_t)1 << 60; // "never" } else if (!strcmp(argv[j],"--stats-every") && more) { Modes.stats = (uint64_t) (1000 * atof(argv[++j])); } else if (!strcmp(argv[j],"--snip") && more) { snipMode(atoi(argv[++j])); exit(0); } else if (!strcmp(argv[j],"--help")) { showHelp(); exit(0); } else if (!strcmp(argv[j],"--ppm") && more) { Modes.ppm_error = atoi(argv[++j]); } else if (!strcmp(argv[j],"--quiet")) { Modes.quiet = 1; } else if (!strcmp(argv[j],"--show-only") && more) { Modes.show_only = (uint32_t) strtoul(argv[++j], NULL, 16); } else if (!strcmp(argv[j],"--mlat")) { Modes.mlat = 1; } else if (!strcmp(argv[j],"--interactive-rtl1090")) { Modes.interactive = 1; Modes.interactive_rtl1090 = 1; } else if (!strcmp(argv[j],"--oversample")) { Modes.oversample = 1; #ifndef _WIN32 } else if (!strcmp(argv[j], "--write-json") && more) { Modes.json_dir = strdup(argv[++j]); } else if (!strcmp(argv[j], "--write-json-every") && more) { Modes.json_interval = (uint64_t)(1000 * atof(argv[++j])); if (Modes.json_interval < 100) // 0.1s Modes.json_interval = 100; } else if (!strcmp(argv[j], "--json-location-accuracy") && more) { Modes.json_location_accuracy = atoi(argv[++j]); #endif } else { fprintf(stderr, "Unknown or not enough arguments for option '%s'.\n\n", argv[j]); showHelp(); exit(1); } } #ifdef _WIN32 // Try to comply with the Copyright license conditions for binary distribution if (!Modes.quiet) {showCopyright();} #endif #ifndef _WIN32 // Setup for SIGWINCH for handling lines if (Modes.interactive) {signal(SIGWINCH, sigWinchCallback);} #endif if (Modes.mode_ac && Modes.oversample) { fprintf(stderr, "Warning: --modeac is currently ignored when --oversample is used;\n" " no ModeA/C messages will be decoded.\n"); } // Initialization log_with_timestamp("%s %s starting up.", MODES_DUMP1090_VARIANT, MODES_DUMP1090_VERSION); modesInit(); if (Modes.net_only) { fprintf(stderr,"Net-only mode, no RTL device or file open.\n"); } else if (Modes.filename == NULL) { if (modesInitRTLSDR() < 0) { exit(1); } } else { if (Modes.filename[0] == '-' && Modes.filename[1] == '\0') { Modes.fd = STDIN_FILENO; } else if ((Modes.fd = open(Modes.filename, #ifdef _WIN32 (O_RDONLY | O_BINARY) #else (O_RDONLY) #endif )) == -1) { perror("Opening data file"); exit(1); } } if (Modes.net) modesInitNet(); // init stats: Modes.stats_current.start = Modes.stats_current.end = Modes.stats_alltime.start = Modes.stats_alltime.end = Modes.stats_periodic.start = Modes.stats_periodic.end = Modes.stats_5min.start = Modes.stats_5min.end = Modes.stats_15min.start = Modes.stats_15min.end = mstime(); for (j = 0; j < 15; ++j) Modes.stats_1min[j].start = Modes.stats_1min[j].end = Modes.stats_current.start; // write initial json files so they're not missing writeJsonToFile("receiver.json", generateReceiverJson); writeJsonToFile("stats.json", generateStatsJson); writeJsonToFile("aircraft.json", generateAircraftJson); // If the user specifies --net-only, just run in order to serve network // clients without reading data from the RTL device if (Modes.net_only) { while (!Modes.exit) { struct timespec start_time; start_cpu_timing(&start_time); backgroundTasks(); end_cpu_timing(&start_time, &Modes.stats_current.background_cpu); usleep(100000); } } else { // Create the thread that will read the data from the device. pthread_mutex_lock(&Modes.data_mutex); pthread_create(&Modes.reader_thread, NULL, readerThreadEntryPoint, NULL); while (Modes.exit == 0) { struct timespec start_time; if (Modes.iDataReady == 0) { /* wait for more data. * we should be getting data every 50-60ms. wait for max 100ms before we give up and do some background work. * this is fairly aggressive as all our network I/O runs out of the background work! */ struct timespec ts; clock_gettime(CLOCK_REALTIME, &ts); ts.tv_nsec += 100000000; normalize_timespec(&ts); pthread_cond_timedwait(&Modes.data_cond, &Modes.data_mutex, &ts); // This unlocks Modes.data_mutex, and waits for Modes.data_cond // Once (Modes.data_cond) occurs, it locks Modes.data_mutex } // Modes.data_mutex is Locked, and possibly (Modes.iDataReady != 0) // copy out reader CPU time and reset it add_timespecs(&Modes.reader_cpu_accumulator, &Modes.stats_current.reader_cpu, &Modes.stats_current.reader_cpu); Modes.reader_cpu_accumulator.tv_sec = 0; Modes.reader_cpu_accumulator.tv_nsec = 0; if (Modes.iDataReady) { // Check we have new data, just in case!! start_cpu_timing(&start_time); Modes.iDataOut &= (MODES_ASYNC_BUF_NUMBER-1); // Just incase // Translate the next lot of I/Q samples into Modes.magnitude computeMagnitudeVector(Modes.pData[Modes.iDataOut]); Modes.stSystemTimeBlk = Modes.stSystemTimeRTL[Modes.iDataOut]; // Update the input buffer pointer queue Modes.iDataOut = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataOut + 1); Modes.iDataReady = (MODES_ASYNC_BUF_NUMBER-1) & (Modes.iDataIn - Modes.iDataOut); // If we lost some blocks, correct the timestamp if (Modes.iDataLost) { Modes.timestampBlk += (MODES_ASYNC_BUF_SAMPLES * 6 * Modes.iDataLost); Modes.stats_current.blocks_dropped += Modes.iDataLost; Modes.iDataLost = 0; } // It's safe to release the lock now pthread_cond_signal (&Modes.data_cond); pthread_mutex_unlock(&Modes.data_mutex); // Process data after releasing the lock, so that the capturing // thread can read data while we perform computationally expensive // stuff at the same time. if (Modes.oversample) demodulate2400(Modes.magnitude, MODES_ASYNC_BUF_SAMPLES); else demodulate2000(Modes.magnitude, MODES_ASYNC_BUF_SAMPLES); // Update the timestamp ready for the next block if (Modes.oversample) Modes.timestampBlk += (MODES_ASYNC_BUF_SAMPLES*5); else Modes.timestampBlk += (MODES_ASYNC_BUF_SAMPLES*6); Modes.stats_current.blocks_processed++; end_cpu_timing(&start_time, &Modes.stats_current.demod_cpu); } else { pthread_cond_signal (&Modes.data_cond); pthread_mutex_unlock(&Modes.data_mutex); } start_cpu_timing(&start_time); backgroundTasks(); end_cpu_timing(&start_time, &Modes.stats_current.background_cpu); pthread_mutex_lock(&Modes.data_mutex); } pthread_mutex_unlock(&Modes.data_mutex); pthread_join(Modes.reader_thread,NULL); // Wait on reader thread exit pthread_cond_destroy(&Modes.data_cond); // Thread cleanup - only after the reader thread is dead! pthread_mutex_destroy(&Modes.data_mutex); } // If --stats were given, print statistics if (Modes.stats) { display_total_stats(); } log_with_timestamp("Normal exit."); #ifndef _WIN32 pthread_exit(0); #else return (0); #endif } // //========================================================================= //