If the aircraft lands or takes off, the Lat/Lon valid flags are cleared.
In the original code, this also resulted in any even/odd position
reports in the mm record being discarded This meant that the code would
require an even and odd position after the change of flight status.
The code had been modified so that any position report in the mm record
is used even if there is a change of flight status. This means there
only needs to be an even or odd after a change of FS, rather than
requiring both even and odd. The result should be earlier decoding of
position.
Don't allow detection of DF-11 SI/II until we have received at least one
DF-11 for the aircraft with an SI/II of zero.
Previous versions would allow an ICAOAddr to be marked as valid if a
DF-11 was received where the crc was less than 80. This is required for
SI/II detection where the SI/II is overlaid on the crc field. However,
this also decreaces the security of the crc. It is possible for a
corrupt message to result in a crc value of between 1 and 79, and this
will lead to an invalid ICAOAddr being marked as received.
To try and prevent this, do not allow detection of DF-11 II/SI fields
until at least one DF-11 crc=0 has been received. Once this happens, we
ca be fairly sure that this aircraft really is within range, and so
II/SI detection can e used.
Updated the way socket handles are used in View1090 to maintain
compatibility between UNIX and Windows.
Added the initial attempt at a Planeplotter uploader
In the table view of aircraft, the heading was displayed as "330 (NW)"
or similar. However, this cause the entry to scroll over into two lines
of text, and reduces the number of planes that can be seen in the table
at any one time.
There probably should be a way to make the table view wider by scrolling
it, but I can't see any way to do that. So for the moment I've commented
out the extra (NW) bit.
*DISCLAIMER*
I didn't write any of this code initially, I've never tried to use it,
and I don't understand Java Script at all. In-fact I hate the wretched
stuff.
Anyway, it appears that no-one has bothered to test any of the Web
interface code using Microsoft Internet Explorer 8 or 9. I've attempted
to hack out the sections of the code that are causing problems, and at
least the web interface now seems to run.
However, for some reason the planes never move - I know this must be a
bug, but I don't know how to fix it.
Most of the errors relate to trailing commas. My guess it that some
Java engines don't mind trailing commas, but that the Microsoft ones do.
There are also some undefined modules (untrackedDeveloperSettings) and
functions (console.log) which I guess those who wrote the code have on
their machines, but forgot to include in the public distribution. I've
no idea how to fix this, so I've just hacked them out of the code.
No changes to dump1090, (except the version number)
Include a sample Linux batch start file called dump1090.sh for use when
running dump1090 headless. This file needs to be copied to the
/etc/init.d/ subdirectory on your raspberry pi, and marked as
executable. Then when you re-start your RPi, dump1090 will start-up
auto-magically and run as a sort of server to allow both local and
remote connection to it's various internet ports.
Modified the Makefile to build a new headless helper application called
view1090
Added view1090. This is an executable that allows you to connect to
dump1090 when it is running and 'see' the interactive screen display.
The default is to try and connect to dump1090 on IP address 127.0.0.1
port 30005. This should work if you are running on the same RPi as
dump1090 and using the default dump1090 port settings. However, if
you're running on a different machine you will have to specify the IP
address of the RPi running dump1090 using the --net-bo-ipaddr switch.
Something like "view1090 --net-bo-ipaddr 192.168.2.65" . You may also
have to sudo it, depending on your privilige settings.
I've also compiled view1090 as a Wiin32 exe, so you should be able to
run it under any 32 bit version of Microsoft Windows - i.e. Win95, Win
2K, Win XP, Win 7 etc. It may work on Win 8 and 64 bit Windows, but I
haven't tried it. The Win32 version is compiled from the same source, so
takes all the same command line switches.
The modesReadFromClient() funtion is called from modesReadFromClients(),
which in turn is called from backgroundTasks(). backgroundTasks() is
called from within the main processing loop.
However, modesReadFromClient() can and does block. It attempts to read
characters from the input stream, and loops whilst there was no error.
This stalls the main RTL processing loop until an error occurs. In order
to support simultaneous local reception (via our RTL dongle) and remote
forwarding (data received from the interweb) we cannot allow this
internet read to stall.
To fix this, in modesReadFromClient() attempt to read a buffer of data
(currently 0x400 bytes). If we get a full buffer of bytes, then process
them, and attempt to read another full buffer. Keep doing thios untill
we read only a partial buffer (less than 0x400 bytes). Process the
partial buffer bytes and return.
This allows us to occasionally process data that is arriving from the
internet (which is buffered anyway in the TCP stack), without blocking
local RTL dongle decoding.
Ok - this is likely to upset some people. Up until now, the vast
majority of the code has been in just one file - dump1090.c. This file
has grown so that it was approaching of 5000 lines long, and it was
becoming unmanagable. So I've split the file into several modules,
hopefully along fairly logical boundaries. The files are :
1) dump1090.c : Basically just the main() entry function, the help
function, the RTL dongle hardware interface, and a few orphan functions
that don't really fit anywhere else.
2) mode_s.c : This contains all the mode S / ADSB decoding functions.
3) mode_ac.c : This contains all the mode A & C decoding functions
4) interactive.c : This contains all the functions to maintain an
internal list of aircraft seen over the last period, and functions to
print them out to the local console.
5) net_io.c : This contains all the network input/output functions
allowing data to be passed in/out to/from other receivers, in formats
such as SBS-1/3, Beast, AVR and JavaScript.
Hopefully this should provide an easier way forward if/when more
functions are added.
Create two different Time-To-Live parameters for the interactive display
list.
1) Modes.interactive_display_ttl defines for how long the display of an
aircraft persists after the last received message. The default is
MODES_INTERACTIVE_DISPLAY_TTL, which is set to 60 seconds. This replaces
the previous Modes.interactive_ttl/MODES_INTERACTIVE_TTL settings (which
were also 60 seconds)
2) Add an additional Modes.interactive_delete_ttl parameter, and
default it to MODES_INTERACTIVE_DELETE_TTL, shich is set to 300
seconds/5 minutes. This defines for how long an aircraft persists in the
list structure after the last received message before being deleted.
Also tidy up a few comments.
I can't pretend that I understand what you guys are up to with all this Java stuff, but since the changes to the maon dump1090.c file are minimal I'll trust you :-)
Conflicts:
.gitignore
public_html/gmap.html
public_html/script.js
All conflicts fixed but you are still merging.
modified: .gitignore
modified: dump1090.c
new file: public_html/config.js
new file: public_html/coolclock/coolclock.js
new file: public_html/coolclock/excanvas.js
new file: public_html/coolclock/moreskins.js
new file: public_html/extension.js
modified: public_html/gmap.html
new file: public_html/options.js
new file: public_html/planeObject.js
modified: public_html/script.js
modified: public_html/style.css
"Please don't call authorities"-warning label is show on map if any special squawk is show.
modified: public_html/gmap.html
modified: public_html/script.js
modified: public_html/style.css
Fixed resetMap()-funtion to reset map-settings to default. Map saves last location and zoom values to localStorage.
Also added new css-class '.pointer'.
modified: public_html/gmap.html
modified: public_html/script.js
modified: public_html/style.css
Options:
SiteCircles = true;
SiteCirclesDistances = new Array(100,150,200);
Circles are only shown if 'SiteShow' is true. SiteCirclesDistances is array of numbers. Distances are in NM or km depending 'Metric'-settings.
modified: public_html/config.js
modified: public_html/script.js
Added option to show values in metric system.
Metric = false; // true|false
Removed unused conversion from aircraftsToJson() at dump1090.c-file.
Tweaked distance calculation to use google map api.
modified: dump1090.c
modified: public_html/config.js
modified: public_html/gmap.html
modified: public_html/script.js
Shows radars location on map. Default is not showing.
Settings:
SiteShow is boolean [true|false]
SiteLat & SiteLon in decimal format.
If using untrackedDeveloperSettings.js-file these settings can be
copy-pasted on that file:
SiteShow = false;
SiteLat = 45.0;
SiteLon = 9.0;
modified: public_html/config.js
modified: public_html/script.js
modified: public_html/style.css
Tweaked selected planes display so it won't push plane-table around. Added
link to FlightStats service and speed to selected plane table.
modified: public_html/script.js
modified: public_html/style.css
Load devel settings file after config.js and settings are saved for
developers even after merges.
modified: .gitignore
modified: public_html/config.js
modified: public_html/gmap.html
modified: public_html/script.js
Example file
--- untrackedDeveloperSettings.js ---
// Load this file after config.js so these settings are used
var CONST_CENTERLAT = 35.21928;
var CONST_CENTERLON = -80.94406;
var CONST_ZOOMLVL = 9;
--- untrackedDeveloperSettings.js END ---
This is the start of breaking the main dump109.c file into smaller
modules to make it a bit more maintainable.
Move all the #define and structure declarations into dump1090.h
Changes based on ideas from John VK1ET. His commit notes are as follows
:
1. Change input socket handling to avoid unnecessary memmove (use
pointers instead)
2. Add ability to read and decode binary beast format TCP.
3. Change output socket handling same as sbs_output - only call output
handler if there is a current client connected use separate ports for
beast in and out - no need for --net-beast flag. Will input/output
format defined by socket connected to. avr raw, beast binary and sbs can
be handled simultaneously.
4. Some comments changes, filtering of ModeAC to json,.
