Oliver Jowett
6daf116b40
Clean up config.js a bit, support configuring page name and site name.
2015-01-22 14:33:42 +00:00
Oliver Jowett
b78b28d95f
Add a "follow" link to the selected plane info.
2015-01-22 14:17:12 +00:00
Oliver Jowett
35e0364670
Fix compile errors.
2015-01-22 13:29:13 +00:00
Oliver Jowett
70e8579850
Simple filter for spurious messages that make it past checksum:
...
don't show aircraft until we have seen 2 messages from them.
2015-01-22 13:22:16 +00:00
Oliver Jowett
7500cabb08
Show rows with non-ICAO addresses in italic.
2015-01-22 13:21:47 +00:00
Oliver Jowett
af3eb3df2b
Move to a simpler versioning scheme (the one derived from upstream
...
is going to break the ordering that Debian expects very soon).
When building from source not via debian/rules, derive a version from
git describe.
2015-01-22 13:19:15 +00:00
Oliver Jowett
ada188a1c8
Changed my mind, put the non-ICAO flag bit in the address itself
...
since we have 8 bits spare, so there's no chance of confusing it
with an ICAO address, and we can safely use the filter table to match
future messages without also matching equivalent ICAO addresses.
2015-01-22 12:30:12 +00:00
Oliver Jowett
35551b4455
Don't emit FATSV output for non-ICAO addresses.
2015-01-22 12:18:46 +00:00
Oliver Jowett
6e1315e3a6
Flag non-ICAO addresses in json output.
2015-01-22 12:18:14 +00:00
Oliver Jowett
d0605629b6
Avoid zero signalLevel.
2015-01-22 11:40:52 +00:00
Oliver Jowett
9a91507583
Flag non-ICAO addresses, display them differently in interactive mode.
2015-01-22 11:14:22 +00:00
Oliver Jowett
34ae2c7349
Make sure to clear address.
2015-01-22 11:13:54 +00:00
Oliver Jowett
04eff1778f
Use the right field for CF in DF 18
2015-01-22 10:59:11 +00:00
Oliver Jowett
7850848ef7
Export a few stats via JSON.
2015-01-22 01:21:53 +00:00
Oliver Jowett
19082d92ea
Measure signal power / noise power (at least in 2.4MHz mode).
...
Switch signalLevel back to a power measurement, don't put SNR in there.
But make it a 0.0 - 1.0 double so we're not scaling everywhere.
Adjust for the amplitude offset when calculating power.
Adapt everything else to the new scheme.
2015-01-22 01:01:39 +00:00
Oliver Jowett
5beecb9f4f
Disable overlay control as it seems to cause more problems than it solves
...
at the moment (aircraft randomly appearing to be on the ground due to
CRC errors, etc)
2015-01-22 00:59:44 +00:00
Oliver Jowett
20456a83fd
Ditch SNR calcs too.
2015-01-21 19:10:07 +00:00
Oliver Jowett
00e232cc4f
Try unrolling the inner loop to speed things up.
2015-01-21 19:03:51 +00:00
Oliver Jowett
ef098a2461
Import new 2.4MHz demodulator from experimental branch.
2015-01-21 13:32:17 +00:00
Oliver Jowett
0493248425
Minor cleanups / comments.
2015-01-21 12:55:46 +00:00
Oliver Jowett
a33e4388c9
Add scoreModesMessage()
2015-01-21 12:55:24 +00:00
Oliver Jowett
fc87a232b4
Return non-NULL errorinfo if there are no errors to diagnose.
2015-01-21 12:54:27 +00:00
Oliver Jowett
2a1a2a0a71
Fix (maybe) JSON escaping.
...
I've obviously never tested this code!
2015-01-21 11:58:51 +00:00
Oliver Jowett
cae20a8060
Escape flight name in JSON in case it has odd characters.
2015-01-21 11:56:27 +00:00
Oliver Jowett
ebae590653
Use MODES_NOTUSED for unused args.
2015-01-21 11:54:55 +00:00
Oliver Jowett
7c64f27c22
Remove unused user latitude/longitude defines.
2015-01-21 11:53:45 +00:00
Oliver Jowett
8ce92f126a
More logging for Comm-B messages.
2015-01-21 01:21:32 +00:00
Oliver Jowett
5e522fe8db
Decoder cleanups from experimental branch.
2015-01-21 00:23:48 +00:00
Oliver Jowett
0433ed3f5d
icao_filter.[ch] from the experimental branch.
2015-01-20 23:53:26 +00:00
Oliver Jowett
270a22e06a
CRC reimplementation to be byte-at-a-time table-driven.
...
Also be smarter about error correction, avoiding ambiguous cases
when --aggressive is specified.
2015-01-20 23:04:05 +00:00
Oliver Jowett
0d3fcfff2e
Remove obsolete TODO file.
2015-01-20 18:42:20 +00:00
Oliver Jowett
ed4d481772
Import CPR changes from experimental branch.
2015-01-20 18:41:44 +00:00
Oliver Jowett
b9b76da02d
Stats rearrangement, based on experimental branch changes.
2015-01-20 17:16:35 +00:00
Oliver Jowett
e02a2cdd44
GPL.
2015-01-20 16:49:01 +00:00
Oliver Jowett
f753c2d9fe
Separate 2.4MHz demodulator into its own file.
2015-01-19 23:50:25 +00:00
Oliver Jowett
a6542b505b
Separate out 2MHz demodulator + support functions to a separate file.
2015-01-19 23:47:51 +00:00
Oliver Jowett
014205324a
Remove dead test code.
2015-01-19 23:43:15 +00:00
Oliver Jowett
07df054590
Move CRC code to a separate file.
2015-01-19 23:41:26 +00:00
Oliver Jowett
721412dc9b
Changelog.
2015-01-19 23:29:07 +00:00
Oliver Jowett
5e80a11934
Fix stable sort of rows with no sortable values (would cause "jumping" rows at the end of the table)
2015-01-19 23:28:04 +00:00
Oliver Jowett
881cb8167d
Release changelog.
2015-01-17 21:04:10 +00:00
Oliver Jowett
5cbe5d909b
Don't cache receiver.json as it may change more frequently now (history size).
2015-01-17 21:02:17 +00:00
Oliver Jowett
971e5754ff
Try to work around a libusb crash on exit after SIGINT.
2015-01-17 19:23:57 +00:00
Oliver Jowett
f0fe4663d5
Oops, helps to actually commit the fix too..
2015-01-17 18:26:36 +00:00
Oliver Jowett
d1f274d469
Avoid a (rare) divide-by-zero crash in 2MHz --phase-enhance.
2015-01-17 18:26:06 +00:00
Oliver Jowett
4a66a31839
Changelog.
2015-01-17 12:31:52 +00:00
Oliver Jowett
f71f93464b
Always sort missing values at the end of the table, even in a descending sort.
...
Simplify the sorting a bit by separating out the "extract value to compare" logic.
2015-01-17 12:27:13 +00:00
Oliver Jowett
8f1b8566d4
Update changelog.
2015-01-16 20:37:55 +00:00
Oliver Jowett
bfcfb1fdcb
Fix sort-by-message-count.
...
(cherry picked from commit 9f40dbaf786c69aaf459c69b2058bba9cd30569f)
2015-01-16 20:34:03 +00:00
Oliver Jowett
e68949bdb3
Write an accurate value for the history count, so the progress bar is correct.
...
(cherry picked from commit 0919700293e34f5a93a4407d33e1e56c0ae0d13c)
2015-01-16 20:33:40 +00:00
