Oliver Jowett
a49b5b8830
Add stats for total aircraft tracks and tracks that have only a single message.
2015-02-08 18:47:39 +00:00
Oliver Jowett
4e177c2d64
Store computed reception time in the message struct so we don't rely on
...
the message being emitted immediately.
Fix computation of reception time so it's more sensible (the block timestamp
is some time after reception of the _end_ of the block, not the start) - this
means that message-emission times are always later than message-reception
times in SBS output, which is a bit more sensible.
Use clock_gettime in preference to ftime.
2015-02-08 17:46:01 +00:00
Oliver Jowett
20407e5378
Don't emit SBS output with non-ICAO addresses ( fixes #9 )
2015-02-08 14:30:10 +00:00
Oliver Jowett
245bbd8b97
Report total, not latest-minute, message count in aircraft.json so that
...
the webmap value doesn't jump around over a reset.
2015-01-23 17:40:03 +00:00
Oliver Jowett
c5b61a33fd
Oops, another compile error, sigh.
2015-01-23 02:11:44 +00:00
Oliver Jowett
c07e45a4c8
Report CPU in integer milliseconds, makes it a bit easier to process.
2015-01-23 02:03:57 +00:00
Oliver Jowett
5b40377b98
Measure CPU for demodulator, read thread, and background tasks individually.
2015-01-23 01:22:22 +00:00
Oliver Jowett
eb023ff1d9
Don't include latest in 1/5/15 min totals, it's a bit confusing.
...
This means the 1/5/15 min values may reflect a period that ended
up to 1 minute ago, but the length of the measured period is always
as expected i.e. 1/5/15 mins.
2015-01-22 20:45:53 +00:00
Oliver Jowett
c8025700e5
Emit all stats in stats.json.
2015-01-22 20:18:51 +00:00
Oliver Jowett
008ae926e7
Add --net-verbatim, which forwards the original uncorrected message to net clients,
...
not the corrected version. Then the client can make its own policy decisions about
whether to accept and correct the damaged messages.
2015-01-22 19:56:38 +00:00
Oliver Jowett
a59077a370
Stats overhaul.
2015-01-22 19:49:19 +00:00
Oliver Jowett
b77d52bd1f
Include recent RSSI in aircraft output.
2015-01-22 15:30:34 +00:00
Oliver Jowett
89d6b64747
Treat signal level in network messages as a (RMS) amplitude, since that
...
is what was previously done and it gives us better range for small signals.
Means a sqrt() call on beast output, but this shouldn't be too bad as
it's only done once per message.
2015-01-22 15:28:35 +00:00
Oliver Jowett
35e0364670
Fix compile errors.
2015-01-22 13:29:13 +00:00
Oliver Jowett
70e8579850
Simple filter for spurious messages that make it past checksum:
...
don't show aircraft until we have seen 2 messages from them.
2015-01-22 13:22:16 +00:00
Oliver Jowett
ada188a1c8
Changed my mind, put the non-ICAO flag bit in the address itself
...
since we have 8 bits spare, so there's no chance of confusing it
with an ICAO address, and we can safely use the filter table to match
future messages without also matching equivalent ICAO addresses.
2015-01-22 12:30:12 +00:00
Oliver Jowett
35551b4455
Don't emit FATSV output for non-ICAO addresses.
2015-01-22 12:18:46 +00:00
Oliver Jowett
6e1315e3a6
Flag non-ICAO addresses in json output.
2015-01-22 12:18:14 +00:00
Oliver Jowett
d0605629b6
Avoid zero signalLevel.
2015-01-22 11:40:52 +00:00
Oliver Jowett
7850848ef7
Export a few stats via JSON.
2015-01-22 01:21:53 +00:00
Oliver Jowett
19082d92ea
Measure signal power / noise power (at least in 2.4MHz mode).
...
Switch signalLevel back to a power measurement, don't put SNR in there.
But make it a 0.0 - 1.0 double so we're not scaling everywhere.
Adjust for the amplitude offset when calculating power.
Adapt everything else to the new scheme.
2015-01-22 01:01:39 +00:00
Oliver Jowett
2a1a2a0a71
Fix (maybe) JSON escaping.
...
I've obviously never tested this code!
2015-01-21 11:58:51 +00:00
Oliver Jowett
cae20a8060
Escape flight name in JSON in case it has odd characters.
2015-01-21 11:56:27 +00:00
Oliver Jowett
ebae590653
Use MODES_NOTUSED for unused args.
2015-01-21 11:54:55 +00:00
Oliver Jowett
5e522fe8db
Decoder cleanups from experimental branch.
2015-01-21 00:23:48 +00:00
Oliver Jowett
b9b76da02d
Stats rearrangement, based on experimental branch changes.
2015-01-20 17:16:35 +00:00
Oliver Jowett
e02a2cdd44
GPL.
2015-01-20 16:49:01 +00:00
Oliver Jowett
e68949bdb3
Write an accurate value for the history count, so the progress bar is correct.
...
(cherry picked from commit 0919700293e34f5a93a4407d33e1e56c0ae0d13c)
2015-01-16 20:33:40 +00:00
Oliver Jowett
c7204ec6ab
Support image/gif content type
...
(cherry picked from commit f4b38a62f69d0df2bb5d3a87979e38d76249b80a)
2015-01-16 20:33:08 +00:00
Oliver Jowett
1db63ebc65
Add generation of history JSON.
...
Add support for URL handlers that match a path prefix.
(cherry picked from commit 38faa510cb881cbf9d2a0a85bbde61130b5259e7)
2015-01-16 20:31:59 +00:00
Oliver Jowett
b1bfb4d520
Rationalization of JSON output. Pass actual URL path to URL handler.
...
(cherry picked from commit becce8d69a6e6cee38d4fdb78b5a4e25d570baea)
2015-01-16 20:30:41 +00:00
Oliver Jowett
63fb121d1c
Status messages in HTTP responses.
...
(cherry picked from commit 820528b4ad7f3963199718205724cdf3ac97b113)
2015-01-16 20:28:36 +00:00
Oliver Jowett
72bfc31458
Display message rate (30 sec average) on the webmap.
...
(cherry picked from commit 848af78be685c6e2a26d0b30e9f385696201a2c4)
2015-01-13 22:01:53 +00:00
Oliver Jowett
0976d12b88
Ditch any query strings in HTTP requests before handling them,
...
to allow AJAX requests to tack on a query string to avoid caching.
2015-01-07 18:40:55 +00:00
Oliver Jowett
e8a62293c2
More WIP on the webmap, mostly fixing up track history.
2015-01-06 01:00:44 +00:00
Oliver Jowett
1f06abf67d
WIP webmap cleanup
2015-01-05 23:20:03 +00:00
Oliver Jowett
58dfbdcb6b
Add support for controlling the accuracy of the receiver location
...
written in the JSON metadata used by the webmap.
2014-12-27 20:52:56 +00:00
Oliver Jowett
9fa09e0e92
receiver.json support, internal webserver cleanup.
...
Add data/receiver.json (generated once) and support for it in script.js.
Internal webserver rearrangement to support multiple json files.
2014-12-10 17:05:22 +00:00
Oliver Jowett
c712543ee5
Only completeWrite() if we didn't run off the end of the buffer.
...
If we did run off the end, complain about it.
2014-12-08 20:17:48 +00:00
Oliver Jowett
39d905324f
Be more paranoid about not overrunning our fatsv output buffer.
...
Request a buffer of a more reasonable size.
2014-12-08 20:14:53 +00:00
Oliver Jowett
2dcc8e3524
Add direct support for FATSV-format output.
...
This is adapted from the FlightAware fork, with some cleanup and
modifications needed to work with the net-cleanup changes.
Inclusion of "verbatim" TSV data read from an AVR-format input
connection is not supported.
2014-12-08 19:56:45 +00:00
Oliver Jowett
af957da81c
Merge branch 'realpath-memory-leak'
2014-12-07 14:10:17 +00:00
Oliver Jowett
d09eefb827
Fix a memory leak from use of realpath() in HTTP request processing.
...
realpath() returns a heap-allocated buffer if given NULL for the destination buffer.
This must be freed by the caller; dump1090 does not do this.
Instead of worrying about freeing it, take the simpler approach of just providing a
stack-allocated destination buffer.
2014-12-07 14:05:24 +00:00
Oliver Jowett
e0bc89e542
Merge branch 'write-json-files' into oversampling
2014-11-23 16:34:18 +00:00
Oliver Jowett
ebab2c0e11
Create json files with mode 0644 - umask.
...
mkstemp defaults to 0600 which is not so useful for serving the file.
2014-11-23 16:32:45 +00:00
Oliver Jowett
7bd2ee5510
Merge branch 'write-json-files' into oversampling
...
Conflicts:
dump1090.c
dump1090.h
2014-11-23 16:03:35 +00:00
Oliver Jowett
6910a4bf4d
Experimental json changes
2014-11-23 16:02:11 +00:00
Oliver Jowett
29d1e53f9f
Merge remote-tracking branch 'upstream/master' into net-cleanups
2014-10-31 17:58:03 +00:00
Malcolm Robb
5f18f6cbca
Fix warnings and Windows compile problems
2014-10-29 19:00:42 +00:00
MalcolmRobb
5699e48855
Merge pull request #54 from l0calguest/bind_address
...
Ability to assign bind address for services
2014-10-29 17:21:12 +00:00