diff --git a/debian/changelog b/debian/changelog index 89f3485..a0d0b66 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,345 +1,6 @@ -dump1090-fa (3.0~dev) UNRELEASE; urgency=medium +dump1090-fa (3.0) stable; urgency=medium - * testing, testing. + * New release series based on dump1090-mutability. + * Initial 3.0 release for FlightFeeder images. -- Oliver Jowett Mon, 11 Jan 2016 17:20:05 +0000 - -dump1090-mutability (1.15~devubuntu1) UNRELEASED; urgency=medium - - * In development. - * Validate that the username given to debconf is syntactically OK and - isn't root. (github issue #24) - * Don't fail on postinst if the given user exists but is outside - the usual system user UID range. (github issue #24) - * Fix timestamp correction when sample blocks are dropped. (github - issue #43) - * Rearrangements to the receive thread. Magnitude conversion now happens - immediately when sample data is received, so there is no risk of newly - received data clobbering old data under CPU overload. - * Fix endian issues affecting big-endian hosts in Beast input/output - and avrmlat output. (github issue #44) - * Fix queueing/resending very old Mode A/C messages (github issue #47) - * Support a variety of sample input formats, generalize sample conversion - * Support noise measurement via --measure-noise - * Support DC filtering (quite expensive) via --dcfilter - * Track age of heading/speed/altitude; use this when deciding what to emit - in FATSV format - * Notice synthetic mlat messages by looking for messages with a magic - timestamp value. If they arrive, tag the derived data as mlat-derived. - Don't include mlat-derived output in FATSV output to avoid loops. - - -- Oliver Jowett Mon, 11 Jan 2016 17:20:05 +0000 - -dump1090-mutability (1.14) unstable; urgency=medium - - * Position reporting: - * Use the correct maximum inter-position-message intervals for surface - position messages (github issue #18). - * Disable receiver-relative position decoding entirely if the receiver - max range is larger than 360NM. - * Implement speed checks on position updates; implausible position - changes are discarded, unless they improve NUCp. Fixes most cases - of "spikes" in position tracks for aircraft with poor GPS data, and - helps with many cases where aircraft are transmitting garbage position - data. (github issue #17) - * If a position update is considered implausible, discard all the other - data in the same message too, just in case - often altitude will be - wrong in this case, too. - - * Message decoding/forwarding: - * NUCp (navigational uncertainty) is extracted from position messages - (github issue #16) - * Improved support for DF18 ADS-R/TIS-B message formats and - cases where they use non-ICAO addresses (handle the IMF bit) - * Don't forward the first message for an aircraft to network clients - until we have seen a second message from the same aircraft. - This should handle most of the "garbage ICAO address" cases. - Disabled in --net-verbatim mode. - * Aircraft with only one message seen are pruned more aggressively - (60 second timeout vs. 300 second timeout normally) - * Don't emit SBS output for non-ICAO addresses (github issue #9) - * Improved the calculation of message reception time seen in SBS output. - Now message reception time should be strictly before current time. - * Don't try to correct more than one error in DF11 messages as these - messages have reduced CRC coverage and multiple-bit errors are - ambiguous. - * Fix some undecodable altitudes that would be interpreted as a valid - altitude of 0ft. - - * Stats & JSON: - * Documented the JSON formats (see README-json.md) - * Fix "-infdB" in stats if no signal peaks have been recorded. - * NUCp is reported in aircraft.json - * Fix "unrecognised ICAO address" stat counter to count the right thing. - * Gather stats on number of unique aircraft tracks seen, and number of - tracks where only a single message was seen (which are probably - garbage). - * Fix stats timestamp output during the period shortly after restart. - * Include timezone in timestamps shown with --stats - * Add various stats for CPR position-decoding details. - - * Webmap: - * Fix webmap history loading when no history is present. - * Better handling of long refresh times in the webmap. - - * Packaging/misc: - * Fix config handling of lat/lon between -0.999 and 0 (github issue #14) - * Add --oversample option to help text (github issue #11) - * More options now accept fractional seconds (--stats-every, - --net-heartbeat, --net-ro-interval, --write-json-every) - * Start dump1090 with a niceness of -5 to reduce the chance of dropped - sample data, except in --net-only mode where it's not using a RTLSDR - dongle (github issue #19) - * Make sure background tasks have a chance to run even if the sample rx - thread is blocked waiting for a USB reconnect. (github issue #20) - * Include timestamps in logging of USB disconnects/reconnects (github - issue #21) - * Catch SIGTERM and do clean shutdown like SIGINT does. Also log about - it. (github issue #22) - * Log (with timestamps) on startup/shutdown so it's more obvious in logs - where dump1090 restarted. - * Mark all HTML/Javascript as conffiles to avoid overwriting user changes - on package upgrade, as many people seem to modify these files. - (github issue #15) - - -- Oliver Jowett Thu, 19 Feb 2015 19:41:39 +0000 - -dump1090-mutability (1.13) unstable; urgency=medium - - * Moved to a simpler versioning scheme rather than trying - to put suffixes on the end of the upstream version scheme. - - * Statistics updates for the stats junkies amongst us. - Note that many of these apply to the 2.4MHz demodulator only. - * Rationalized the demodulation stats that are collected. - * Collect mean signal level, peak signal values. - * Collect a count of signals stronger than -3dBFS. - * Collect stats on remotely-received messages. - * Collect stats on CPR position decoding. - * Collect more CPU stats. - * Stat buckets for the last 1, 5, 15 mins are maintained. - * Stats display due to --stats-every does not reset the "total" stats. - * All stats are now exported via JSON at /data/stats.json. - - * When --oversample --phase-enhance is in use, all phase positions are - evaluated and the best result is used, rather than stopping at the first - error-free message. This increases CPU by about 1/4 but recovers about - 5% more messages. - * Error correction in --aggressive mode is now more conservative: - it will only fix 2-bit errors that can't be confused with a 4-bit error. - * DF11 messages can now be partially error-corrected (only for errors that - do not result in a syndrome in the final 7 CRC bits) - * Partial TIS-B support. Feedback sought from people who actually receive - TIS-B messages! - * Support for non-alphanumeric characters in callsigns. - * RSSI measured for individual messages. - * Simple filtering for bogus messages that make it past CRC checks: don't - display or emit aircraft state until we have seen at least two messages - from the same aircraft. - * --net-verbatim option added; if enabled, for messages that have - repairable CRC errors the unrepaired version of the message is forwarded - to network clients. This lets the client decide what policy to impose on - damaged messages. - * Made 2.4MHz sampling the default for new installs. - - * Internal changes: - * Restructuring of the code to be a bit more modular. - * Mode S message decoder and output formatting cleanups. - * 2.4MHz demodulator main loop unrolled to demodulate a byte at a time; - this helps compensate a little for the --phase-enhance change above. - * CRC calculation switched to a faster byte-at-a-time table lookup. - * ICAO address filter rewritten to be a bit smarter, and to support - Comm-B overlay control in the future. - * Non-ICAO addresses (e.g. from TIS-B and ModeA/C) are flagged internally - so they cannot be confused with a real ICAO address. - * More changes to try to work around libusb crashes on exit. - - * Webmap changes: - * Show recent RSSI for the selected aircraft. - * Non-ICAO addresses are shown italicized. - * Fix webmap stable sort of rows with no sortable values (would cause - "jumping" rows at the end of the table) - * Doubleclick on an aircraft marker or table row to follow that aircraft, - recentering the map as it moves. Or click on the selected aircraft's - callsign or the arrow next to it. - * config.js cleanups. Page title and site name can be specified here now. - * Added vertical rate indicators to altitudes on the webmap. - * Linked from the aircraft ICAO to airframes.org. (Other site - recommendations welcome!) - * Infoblock layout changes. - - * License for my modifications changed to GPL2+. Previous binary - releases were effectively already GPL2+ due to linking with librtlsdr. - - -- Oliver Jowett Sun, 25 Jan 2015 16:45:00 +0000 - -dump1090-mutability (1.10.3010.14mu-12) unstable; urgency=medium - - * Add generation of history JSON. - * Load history when the webmap is initialized. - * Display stats on exit in --net-only mode. - * Explicitly pick the closest tuner gain to the one requested. - * Include a status message in HTTP response headers. - * Fix sort-by-message-count in the webmap. - * Always sort missing values at the end of the table, even in a descending sort. - * Avoid a (rare) divide-by-zero crash in 2MHz --phase-enhance. - * Try to work around a libusb crash on exit after SIGINT. - - -- Oliver Jowett Sat, 17 Jan 2015 21:03:55 +0000 - -dump1090-mutability (1.10.3010.14mu-11) unstable; urgency=medium - - * Fix UTC clock display in non-UTC timezones. - * Layout tweaks in the info panel. - * Change plane color if we have not seen a recent position update - (previously, any type of message was enough). - * Fix thinko in skipping over decoded message samples in the 2.4MHz demodulator. - * Fix a couple of problems found by valgrind. - * Fix several problems with surface position decoding and relative - position decoding. - * Fix hang on exit after SIGINT. - * Add --max-range parameter. Use it for relative position limits, and to - discard bad position results. - * Display message rate (30 sec average) on the webmap. - * Restart lighttpd on package upgrade if we changed its config files. - * Require that the JSON refresh interval is at least 1, as it is used - to control the webmap refresh rate even if JSON files are not being written. - - -- Oliver Jowett Wed, 14 Jan 2015 01:17:51 +0000 - -dump1090-mutability (1.10.3010.14mu-10) unstable; urgency=medium - - * Many changes to aircraft.json and the webserver code: - - * Restructure to include the current timestamp, and move - aircraft data down a level. If you're processing the JSON yourself, - you will need to adjust your code to handle this. - * Only include aircraft data when we are sure it's valid. - * Include the time of the last position report in. - * If the aircraft is on the ground, report altitude as "ground". - * Strip trailing query strings from URLs before matching, to allow AJAX - cache-busting query strings to work. - * Disable the lighttpd stat cache in the provided config fragment, to - avoid problems with partial content being served if lighttpd caches an - old size for the JSON data. This would manifest as "bad content length" - or JSON parse errors in the webmap. - - * Many changes to the webmap javascript: - - * Internal restructuring of how the plane table and map markers are - maintained. Should be faster and less memory-hungry. - * Sorting the plane table now sorts missing data high (end of the table for an - ascending sort). - * On-the-ground aircraft display an altitude of "ground". - * Dashed tracks are used when there are lots of missing position reports (more - than 5 seconds between positions). - * Green tracks are used for on-the-ground aircraft. - * Limit history storage requirements by only retaining at most one position - per 5 seconds. - * Removal of old aircraft should be much more reliable now, even across - long pauses (e.g. browser hibernation). - * Change the clocks to be two UTC clocks: one from local browser time, - one reflecting the receiver timestamp in the last update. - * Add "total aircraft" and "total aircraft with positions" counters to the - infobox when no aircraft is selected. - * Add a "history positions" counter to the infobox when no aircraft is - selected; this shows the number of points making up the historical track - lines. - * When an aircraft is selected, show both metric and imperial units in the - infobox (metric setting controls which is shown first). - * When an aircraft is selected, show the time since last message and time - since last position message in the infobox. - * If aircraft.json can't be retrieved, display a warning. - * If aircraft.json can be retrieved but doesn't appear to be being updated - (e.g. external webserver, and dump1090 has stopped), display a warning. - * config.js: Change the default map zoom setting to be more zoomed in. - * config.js: Add some comments. - * config.js: Add an option to hide the clocks. - * Remove extension.js and options.js, as they aren't really maintained. - * Enable strict mode for script.js / planeObject.js. - - * Fix initial map centering to correctly use the receiver location. - - -- Oliver Jowett Wed, 07 Jan 2015 23:54:10 +0000 - -dump1090-mutability (1.10.3010.14mu-9) unstable; urgency=medium - - * Fix warnings. Add -Werror so they break the build in future. - * Remove dead tracking code related to the removed PlanePlotter feed. - - -- Oliver Jowett Sun, 04 Jan 2015 20:23:26 +0000 - -dump1090-mutability (1.10.3010.14mu-8) unstable; urgency=medium - - * Version-only rebuild to reflect the upstream dump1090 version we - have merged from. Retaining the trailing build number to avoid - confusion (as far as that's possible given this versioning system!) - - -- Oliver Jowett Sun, 04 Jan 2015 12:32:30 +0000 - -dump1090-mutability (1.08.2302.14+1mu-7) unstable; urgency=medium - - * Notice if we lose the RTLSDR device, and try to reconnect when that happens. - This lets you unplug/replug the RTLSDR without dump1090 exiting, and also - lets dump1090 tolerate occasional USB glitches that make the dongle reset - itself. - * Fix some of the more glaring pthread bugs. - * Center the webmap on the receiver location. - * Mark config.js as a conffile, so user changes won't get overwritten. - - -- Oliver Jowett Fri, 02 Jan 2015 22:53:55 +0000 - -dump1090-mutability (1.08.2302.14+1mu-6) unstable; urgency=medium - - * Add support for LOG_DECODED_MESSAGES option to log all messages (disables --quiet). - - -- Oliver Jowett Tue, 30 Dec 2014 17:09:36 +0000 - -dump1090-mutability (1.08.2302.14+1mu-5) unstable; urgency=medium - - * Add Provides: fatsv-data-source - - -- Oliver Jowett Tue, 30 Dec 2014 00:01:51 +0000 - -dump1090-mutability (1.08.2302.14+1mu-4) unstable; urgency=medium - - * Remove half-implemented --no-decode option. - * Remove Windows support files that aren't needed for the Debian package. - * Remove some legacy support scripts not needed by the Debian package. - * Add support for controlling the accuracy of the receiver location - written in the JSON metadata used by the webmap. - * Oversampling is now less scary! - * Warn if --modeac is used together with --oversample. - * Link to github from the webmap. - - -- Oliver Jowett Sat, 27 Dec 2014 22:24:39 +0000 - -dump1090-mutability (1.08.2302.14+1mu-3) unstable; urgency=medium - - * Ask about json interval before json dir and skip the dir question if - the interval is disabled, it makes more sense that way. - * Be much more cautious about missing config settings so we don't explode - so badly if something is omitted. - * Use the package version as the version number compiled into the binary. - * Add data/receiver.json (generated once) and support for it in script.js. - * Internal webserver rearrangement to support multiple json files. - * Dongle "device index" actually accepts serial numbers too, document that. - * Add input validation to most of the config questions. - - -- Oliver Jowett Wed, 10 Dec 2014 21:58:12 +0000 - -dump1090-mutability (1.08.2302.14+1mu-2) unstable; urgency=medium - - * Fix a memory leak from use of realpath() in HTTP request processing. - * Add direct support for FATSV-format output, adapted from the FlightAware - fork. - * Big rearrangement of configuration to add debconf support. - * Update Build-Depends based on glitches found building under pbuilder. - - -- Oliver Jowett Wed, 10 Dec 2014 01:06:56 +0000 - -dump1090-mutability (1.08.2302.14+1mu-1) unstable; urgency=medium - - * Initial release. - - -- Oliver Jowett Sat, 06 Dec 2014 23:07:02 +0000